Steven Budden Posted July 12, 2005 Share Posted July 12, 2005 Does anyone know where I can find an online manual for the above item? I just got one on ebay and it won't focus and the image is not centered and I'm messing with it but can't figure out how to make it keep focus. Steven Link to comment Share on other sites More sharing options...
Jacob Waltman Posted October 1, 2011 Share Posted October 1, 2011 Not sure if anyone ever came through, but I'm also looking for a copy of the manual if anyone has one and is willing to send it along. Thanks. Link to comment Share on other sites More sharing options...
Premium Member Dom Jaeger Posted October 1, 2011 Premium Member Share Posted October 1, 2011 There's a free German language manual on this page: http://www.webjam.com/cinetechnique/super_8/$journal/2009/04/08/zeiss_ikon_moviscope__visionneuse_8_mm_ou_16_mm Click on "mode d'emploi.." You can also buy an English manual for 6 bucks here: http://www.texsales.com/proddetail.php?prod=OM6630&cat=7 Link to comment Share on other sites More sharing options...
Charlie Peich Posted October 1, 2011 Share Posted October 1, 2011 Not sure if anyone ever came through, but I'm also looking for a copy of the manual if anyone has one and is willing to send it along. Thanks. Here you go Jacob, this is the "official" Moviscop user manual for free. As you will see, it was written for the advanced Movie Maker to use at home. Sadly, there isn't any repair or alignment info, or a parts list included. If anything went wrong, you sent it to an equipment repair house or distributor of editing equipment that dealt with Zeiss Ikon editing gear, or to Zeiss directly. There isn't much to go wrong with these viewers other than getting dust and hairs out of the prism mechanism. The plastic aperture plate would wear down, and that had to be replaced. This happened faster if you have the model that has the pressure pad as outlined on the last page of the manual. But, you really have to run a lot of film through it. I don't know where you can get parts in the States off hand, you might have to track them down in Germany. Look for film editing supply houses. Dust does accumulate on the prism and the lens located right below it, which really lowers the brightness and contrast of the image. Once you clean it you'll be amazed at the sharp image. If you understand the principles behind these viewers, are mechanically inclined and know how to clean optics, these aren't that difficult to take apart, clean and re-align. Charlie Link to comment Share on other sites More sharing options...
Jacob Waltman Posted October 1, 2011 Share Posted October 1, 2011 Thanks so much, I really appreciate it!... Link to comment Share on other sites More sharing options...
Rudy Velez Jr Posted March 26, 2015 Share Posted March 26, 2015 I just got a hold of one of these & I have questions: (A) How many different 'types" of models of the Moviskop did Zeiss make? I noticed that on my Moviskop the voltage is 125v but does not have easy turn knob as seen in the manual ( which is kindly provided above ) instead the knob has a silt as if to use a key,screwdriver, or whatever fits to turn it, however it does not turn easy, and I do not want to break. Currently it is @ 125 volts, so I should probably first change that to 110? (B) Focusing knob. I feel like this is the main issue with my unit. Is there any way to troubleshoot this or fix the knob? I threaded my film into the Moviskop and basically the only hitch I am facing is, no clear image in my viewer. I can only see 1 bulb which is horizontal and works, yet there is no image coming on my screen, what could be my issue be? Perhaps the voltage being 125 and not 110 is affecting the image. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now