Marcos del Villar Posted August 28, 2018 Share Posted August 28, 2018 Hello, It seems I can't attach my 400ft mag bolex motor to the mag. Position is correct (with the motor cable pointing to the mag) but even pressing strongly the motor remains unlocked and I am not able to turn clockwise. Are there two versions of motors or some part is missing from mine? I attach pictures of both. Marcos Quote Link to comment Share on other sites More sharing options...
Marcos del Villar Posted August 29, 2018 Author Share Posted August 29, 2018 This issue is solved. Thank you Quote Link to comment Share on other sites More sharing options...
tom lombard Posted August 29, 2018 Share Posted August 29, 2018 just curious as i also have an EL and 400' mags... was something loose or bent. or just user issue :) thanks, tom Quote Link to comment Share on other sites More sharing options...
Marcos del Villar Posted August 29, 2018 Author Share Posted August 29, 2018 I have to thank Jean-Louis Seguin for his advice. The disk you see in the center of the motor is actually the back side of the piece you see in the magazine. I had to remove it because it was sticked there by mistake. It's fully working now. Quote Link to comment Share on other sites More sharing options...
tom lombard Posted August 29, 2018 Share Posted August 29, 2018 thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.