Jump to content

LOG shooters out there


 Share

Recommended Posts

  • Sustaining Member

I run into situations where my camera can't apply a LUT to the monitor out.

It's been happening when post requests HD footage. And the FX9 camera can't downsample from the 6k sensor to HD and apply a LUT at the same time. So in the "HD" scenarios, I and everyone else gets log.

Now, I've loaded a LUT into my on-cam monitor and can expose fine. But that LUT doesn't pass through to the director or clients. (It gives the option to pass a more contrasty default LUT, but not mine). You don't want the business end receiving a more blown-out image than you're actually recording. So, as a holdover, I've borrowed an AC-powered Blackmagic Teranex Mini Converter and use it on the director's end to apply a the same LUT.

How the heck do you apply a LUT on camera-end and send it to all the monitors? Is Teradek the only option?

What other on-cam monitors actually pass your loaded LUT through?

Thanks folks.

 

Link to comment
Share on other sites

Just got off a shoot with 13 or so FX6’s, an FX9 and a few A7’s. I needed all cameras to output a logarithmic signal for me to monitor while the rest of VV needed to see a regular standard rec709 signal (about 5 or so monitors, 2 on switchers). 
I personally went with the switchers going through inline LUT boxes (Teradek COLORs) and the rest of the monitors where looped through BM 12G HDMi to SDI converters and a few on a teranex and occasionally a ultra studio rack. 
In your scenario you can load custom LUT’s onto 12G converts and I believe 6G and 4G (maybe) converters as well (however unsure) they have a small form factor and are relatively cheap. 
Teradek color’s are good when partnered with a live grading solution however in your case I don’t really believe it necessary. 
I did end up using an older BM I/O 3G box it was able to take multiple channels and worked with pomfort so in my situation it was perfect but yeah for something small the newer 6G-12G converters are something to look into.

Apologise for terrible wording, wrote on phone.

Link to comment
Share on other sites

  • Sustaining Member

That's a lot of cameras. My god.

Thanks Gabriel. Yeah, I've done rack mount converters for log multicam shows. I was hoping to hear about a DA box with LUT capability that would fit on the back of a camera. So it sounds like I'm heading in the best direction.

Thanks for the suggestions.

[edit: answered my own question]

Edited by Stephen Sanchez
Link to comment
Share on other sites

  • 2 weeks later...

In my opinion, the most elegant option would be an on-camera monitor that can apply the LUT downstream.  I use a smallHD503 which is handy because the downstream LUT can be controlled separately from the operator's LUT.  obviously, replacing your monitor would be a significant cost but avoids adding another box to your rig!

Link to comment
Share on other sites

  • Sustaining Member

Teradek recievers can take 3D LUTs (if your client monitors don't have them). A bunch of onboard monitors will also passthrough LUTted images as well these days.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Forum Sponsors

Visual Products

FJS International

Film Gears

CineLab

Wooden Camera

Gamma Ray Digital Inc

Broadcast Solutions Inc

Serious Gear

Metropolis Post

Abel Cine

Tai Audio

New Pro Video - New and Used Equipment

Cinematography Books and Gear



×
×
  • Create New...