Carlos Martínez

Thanks, Walter. As I took some time to raise this question, it took some time to get answers. But my location findings check to what you say. Someone mentioned a 160ASA equivalence (even if I know I shouldn't use that), which falls within the +/- 2 stops you mentioned for safe shooting. This project should be screened in TV only, so there shouldn't be much of a problem. This week I should have an interior shooting, where I will use the 100 mark you advice on. That project will be transferred to film.

I am very sorry to hear that. Apparently there's a routine to connect 1394 terminals to a computer, so there won't be any live potential that may fry the computer firewire or the camera's. Best thing is to connect them with their respective powers off. The other way is to intertouch the ground metals first, so the eventual potential is discharged. Then you plug it in. The third way, which I am implementing myself, is buying a firewire isolator, which should prevent such accidents happening. Apparently they do. It may hurt your pocket, but I think it could solve the problem. Why don't you call them?

Does anyone know or would say the ASA equivalent is for the Sony Z1/FX1?

Can anyone provide a list of critical tests to be made for a project that will be transferred from HDV to 35mm? To start with I only plan to shoot in 50i with the Z1. But what about the other settings: skin detail, sharpness, etc.? Swiss effects has a list that can be used as a starting point, but maybe someone else has other suggestions. Capture of these tests might be made to an Avid Xpress Pro or to a Final Cut Pro, but I think you need an intermediate step for FCP, right? We shouldn't do anything but cutting the tests on the program, leaving color correction and/or effects for the pre-transfer suite, where we should take the hard-disk to, properly exported. Carlos

Then out the window goes portability, right?... Files will be HUUGGEE... So you will need tons of HDs to take it all.

You mean the camera racks focus when turned on even if the autofocus is off? Isn't anyone using a follow-focus on the Z1? Are you sure?

AFAIK, using a proper converter like Miranda HDV-bridge, you can convert HDV through the firewire interface onto HD. That would allow you using any HDV camera, even one not having HD-SDI output.

You should try these guys too: http://geardear.com/ Quality seems very good and prices are more affordable than all the others.

Thanks for all the comments. I am also thinking very much in the way you suggest. Consider the filters as "throw-away" types and see how they behave. The other question is the Cokin bellows, that I was considering getting one, but apparently it has one problem that to rotate a filter you will also rotate the bellows. That is a problem, as you imagine. The next is price, as the front diameter for the Century wide-angle I intend to buy is 92mm, which would not allow me using the one I wanted. The larger one is about the same price as the Geardear matte-box I was interested in. So that would be a follow-up to my original question: has anyone used the Geardear matte-box? This is the one I am talking about: http://www.geardear.com/

Let's make this check: 1) Is your 1394 input working properly on your computer? 2) What happens when you power your camera with the firewire cable connected? In XP it sounds a beep and automatically opens a window on what you want to do. I am not familiar with the Mac on that. 3) Is your firewire cable fine? Have you tried another cable? Can you try another camera with the cable and see what happens?

Hi, I have been looking for the right Forum to put this in, and I think this might be the place. I am buying a Sony Z1 camera, and as usual when I shoot video I want to to shoot "film style", coming from film as I do. Before film people start crying out about how better is shooting in film (which I agree on), in my country (Brazil) it's far far far more expensive doing so. Both in raw material and rentals. As one project I am starting will take me a long time, shooting in HDV might be a good compromise between low budget and good quality. And image control is what I want to talk about. The question is the filter kit I want to buy for this combo. I was considering using several Cokin products on the Z1. To start with they have a bellows, which might be an affordable and effective way to fight reflections... also reminding me of my Arri 2C years. Cokin also manufactures an extensive filter list, being their graduated NDs the ones I am more interested in. Has anyone here used them? In a range up to 10, grade 5 being "fair", how would you consider the Cokin filters?

I don't think so. Except if you play it on a universal projector. That shouldn't be a problem. They record data, not video system.

Of course. But one of the things I had read were coming for the 110 was the capability to use the new film lens adaptor, along with the image correction. As it is now it looks more like a firmware correction.

Not very practical, isn't it?...

Using the camera upside down is not something I might be interested on. Wasn't there a way to put a lens on the LCD screen and/or viewfinder to accomplish that? What about panning and real right/left?