Charles Pickel

Hi Dom, Thanks for your message. Yes, I do offer a modification for the Zeiss 10-100mm f1.8/T2 zoom lens that converts it to Super-16 coverage and PL mount (this is the only mount option). It works on both Mk-I & Mk-II lenses. I offer this essentially as a service as installation can be a little tricky, esp. on MK-II units. However, sometimes I have supplied the mod as a kit to qualified technicians. It looks like you are one ! we should talk. Here are some details: https://www.facebook.com/SeriousGearCo Thanks ! -Charles

FWW I recently performed a full service on this camera, It is a rare beauty and in extremely good condition. -CP https://www.facebook.com/SeriousGearCo

OFFERED FOR SALE: Freshly converted to SUPER-16 format, Zeiss 12-120mm T2.4/PL SUPER-16 zoom lens (based on Mk-I Zeiss 10-100mm f1.8/T2 zoom w/80mm front diameter). This is the nicest, cleanest lens of it's kind I have seen in years. It is as good internally as it is cosmetically. It has seen little wear and holds focus perfectly through the zoom range. Optical surfaces are spotless. The lens is fitted with an auxiliary zoom gear for use with servo motors and will come in a fitted case. I'm asking US$ 6500.00 + shipping for the kit. Reasonable offers considered You will never see a finer MK-I Zeiss of this type. SHIPPING, CUSTOMS DUTIES & APPLICABLE TAXES ARE THE BUYER'S RESPONSIBILITY

Hi Antoine. Email sent with detailed info. Merci !

Je suis si desole... <aaton.com>

Selling for a client: MK-III type Zeiss high speed 35mm T1.3/PL for 35mm & Super35 format. Focus scale in FEET. -Recently lubricated & collimated. -PRISTINE optical surfaces (a few dust particles visible inside) -Barrel shows average wear. Rear of barrel has worn paint, brass visible in places. Pretty typical for this type of lens. Image in projection is excellent. ASKING: USD$ 16,000.00 + SHIPPING & INSURANCE Charles Pickel /Serious Gear Co /Seattle USA email: cp@seriousgear.com FB: https://www.facebook.com/SeriousGearCo

DM sent

PRICE REDUCTION TO USD$ 900.00 Aaton adapter (set screw type): $ 95.00

HI, What version, are PL mounts factory or adapters ?

Offering for sale in very good condition, a classic Angenieux retrofocus super-wide lens for 16mm: 5.9mm f1.8/T2 in Arri standard mount. We have adapters of various types available at additional cost. The lens has clean glass for its age. Has some barely visible micro-scuffs on front coating. Will not affect images. Rear element is pristine. Factory metal front cap is included, after-market rear cap (fits tight, won't fall off). This is a RETROFOCUS lens, and so has no focus control ring. It is preset to about 6' ft./2M focus distance. Depth of field will carry other distances depending on iris diaphragm setting. This is a standard 16mm lens but is usable for Super 16, if you can live with some vignetting at the corners. First US$ 1000.00 takes it (or best offer). + shipping per agreement with buyer. Thanks ! -Charles (cp@seriousgear.com)

Viewing screen sold. Mag Sale Pending.

Now listed on eBay:https://www.ebay.com/itm/304974761620#shpCntId

Bump , listing updated.

Handgrip sold, MAGAZINE AVAILABLE, new picture posted of XTR-Prod fiber screen. Thanks for looking !

Offered for sale: Excellent Aaton DX 400' film magazine for all XTR models (A;B or C magnetic ID). Magazine is newly serviced and will have old acoustic lining upgraded to mass-loaded vinyl sound deadening material that will never curl. Upgraded machined aluminum core lock hubs. Later type one-way sprocket drive (XTR-Plus/Prod era). Overhauled to factory specs & scratch-tested, incl. rubber nose guard: US$ 2250. 00 + shipping & insurance. FOB Seattle USA Other items we have on hand that may be of interest: - Fiber Optic viewing screen for XTR-Prod- Immaculate condition- (Camera gate/1.78:1 HDTV/1.85:1 corners) US$ 700.00 DM or email: cp@seriousgear.com

Offering for sale, an extremely clean Aaton 400' DX mag. Compatible with all Aaton XTR type cameras + a few others (LTRX; XO). Mag was stripped to chassis & repainted by previous owner. I have now overhauled the mag, replaced drive belt, installed new clutch friction media + other parts. Adjusted to factory specs & scratch/noise tested. Includes rubber nose guard. There is also a spare ID magnet for designating it a "B" mag and the retention nut for using 100' daylight loads. These have become scarce, and you are unlikely to find a nicer mag. Asking US$ 2250.00 + shipping. Will ship internationally (buyer responsible for all duties & taxes). Thanks !

Item ships today. Tracking to follow thru eBay.

Yes: https://www.ebay.com/itm/304819257944 Just emailed you, thanks !

Offering for sale: One Aaton 400' film magazine for LTR7 & LTR54 type cameras. Magazine has been serviced and fitted with a number of new parts (chiefly S16 rollers). Clutch tensions have been regulated, Sprocket assembly adjusted and magazine scratch tested on an LTR54 camera at 24fps. Runs clean & quiet. Looks like it was probably repainted at some time in the past. Take-up side door has partial hinges (lid comes off), T/U side door has full hinges. This is the factory original configuration. Factory rubber nose protector included. Serial # is M1150. Ready to use on your next project. Asking USD$ 750.00.

Will DM you.

Selling on behalf of a non-profit film foundation: Used Arriflex 35II-C camera kit in well-used condition. Camera has the rare Cinematography Electronics Xtal motor base and matching CE Intervalometer controller for doing time-lapse. The camera was not well-maintained, but the movement turns smoothly, CE motor runs strong at various speeds, LED's all light, mirror shutter is complete and bright, has 1:1.85 ground glass installed. Kit has 5 x 400' mags (IIB type, belt driven in near mint condition), 1 x 400' mag (II-C type, gear driven), and several 200' mags in mint cond. Not much in the way of lenses: Schneider 28mm of indeterminate quality (glass is clean) and an unusual Nikon 300mm f4.5 with a nice Arri bayonet conversion. There is a 12v lead-acid type dual block battery built into a plastic case. it has integral chargers built by Oppenheimer Cine, Seattle. Dead lead-acid units are easily and inexpensively replaceable. There is also an original II-C variable speed motor (no cable) and hi-hat bracket. IIB type matte box (3x3") and a small filter kit. The foundation wishes to liquidate this equipment at a fair price to benefit independent filmmakers, and recognizes this may be a camera in need of some TLC. The list at this point: USED Arriflex 35II-C camera body (50fps body), turret with one Arri Bayonet mount, 2 x standard mounts, 1:1.85 ground glass Arri variable speed motor with idler gear & screws (NO CABLE) Cinematography Electronics XTAL motor base (4-pin XLR cable incl.) Cinematography Electronics Intervalometer (Fischer 11-pin cable for Arri) Arri IIB matte box (takes 3x3 filters") Arri "Hi Hat" camera stand Tiffen filter kit: 3x3" 85, 85N3, 85N9 B& W filter kit : Yellow, green, red filters 5 x 400' magazines: IIB type 1x400' magazine: IIC type 2x 200' magazines Arri periscope finder Custom dual block battery w/chargers (cells are dead) Niikon 300mm f4.5 ARRI B mount lens Schneider 28mm ARRI standard mount lens Cases for most items More photos available on request PRICE: US$ 3500.00 >>>Reasonable offers considered. Motor alone is worth somewhere near this amount. Thank you ! email: cp@ seriousgear.com

Make me an offer over US$ 350.00 and it's yours (mssg me thru Cinematography.com) Thanks ! https://www.ebay.com/itm/304631084248

Sorry, no 6:1, but I have an HEC multi-coated Ang. 10-150mm in Arri stainless bayonet mount. Very late 1980's production, clean glass, smooth mechanism. Could possibly be remounted. Reasonably priced: US$ 800.00 + shipping. Aaton & Arri PL adapters available at additional cost.

HI Girogio, we have a Kinoptik 9.8mm converted by Century Precision Optics with full cine geared focus, stainless steel PL mount and internal filter chamber. Asking US $ 6800.00 or best offer. Thank you ! -Charles email: cp@seriousgear.com

http://I Ollie, I have a very nice Media Logic 5 digital speed control with 11-pin Fischer cable for Arriflex. These are neat little devices, more compact than the CE Precision Speed control and no camera modification necessary. Switchable decimal point for .001 fps increments. Will control your 16SR up to 72fps.. These have gotten tough to find. Yours for a mere USD$ 325.00 + shipping. email: cp@seriousgear.com