Search the Community
Showing results for tags 'MOTOR'.
-
I just bought a motor for my Arriflex 2b. It is an Arriflex 24f constant speed motor. When I held the two together, the gear in the center of the motor and the gear in the camera are nowhere near each other, and it looks like there is another gear that is missing. I noticed the cine60 base has an intermediate composite gear, is this the same case in the Arri motor? Can I still purchase one of these gears should they exist? Thanks, Max May DP and Writer: Buteo-Gallus Films
-
I just purchased a Kodak Instamatic M6 from ebay. It arrived in excellent condition, but was not working (the seller did not say it WOULD work) anyway I checked to make sure all the contacts were clean on the battery compartment, and the cartridge compartment looked decent...all in all it looked like it was in great shape. I opened up the auto exposure control battery part and there was only one battery in it and the battery was corroded a bit, so i removed it cleaned out the compartment and left the battery out. (I am going to buy the necessary two replacement batteries for the auto exposure control) The trigger pushed in, but the motor did not sound as if it were running. i pushed it several times but to no avail. (i think i heard the motor run for a split second twice, but nothing else) my friend looked onver the camera with me and we sprayed some contact cleaner on the regular battery contacts just to make sure. the trigger still did nothing. I held the camera up to my ear and heard a low sort of vibration, as if something completed a circuit inside the camera, but i did not push the trigger in...it was doing this by itself. I took the batteries out and it stopped. I came here and saw a forum post of someone having a similar issue and the replies suggested that the trigger may be "stuck" on or defective, or that the drive shaft gear is not working...because its neoprene and probably has broken because the camera is so old. FINALLY, after all that explanation my question is essentially what should I do now? I have a couple cartridges of film so i could pop one in and see if that works (but i dont see how that would change the trigger) or should i try and take it apart and clean the contact with the trigger, or is it the gear....or basically what are my options.
-
Hi guys. Selling my lovely TOBIN TCS TXM-22A Crystal Sync Motor for Arriflex 16s. Bought from Du-All Cameras 2 years ago. never used, only tested recently, working like a charm. Asking price: US$ 900 (Paid US$ 995, receipt as proof). Can ship worldwide. Item is in Brazil. Can declare small value to avoid customs. Shipment costs is around US$ 60, ETA 2 weeks by normal postage. Can ship UPS if you'd like. Will post pictures here soon. Any questions, just shout. *** PLEASE CHECK MY 2 ARRI 16S KITS FOR SELL ON EBAY: http://www.ebay.co.uk/itm/2-ARRI-16S-ARRIFLEX-KITS-FULLY-WORKING-PRISTINE-CONDITION-/171665355148?#shpCntId
-
Hello! I have been trying to outfit my Arriflex 16MB with a sync motor for music videos or similar (knowing how loud my camera is). I purchased a 60hz - 42v sync motor without its transformer for a reasonably low price on ebay. I shouldn't have any trouble building my own transformer but the connector on the motor is a little confusing to me. Does anybody know what the pins are on these 60hz - 42v motors? I assume there is a ground, pilot tone, +/- 42v, maybe a secondary at 8vdc for the torque motor on the SB model? Any help would be appreciated!!
-
Looking to do a long truss mounted tracking shot for a show I'm working on in NYC. Can't seem to pinpoint what a system like this is called and where to rent in NYC: http://www.youtube.com/watch?v=iKcBNbRSdyI#t=14 Anybody have any suggestions?