Jump to content
Sign in to follow this  
Greg Kubik

Part for O'Connor Tripod Head

Recommended Posts

I have an O'Connor 1030B Tripod head that needs a part. The mounting point between the pan handle and the head itself has been worn down over the years and now slips when tilting the camera. Does anyone know the part number or where I could find it? Please see picture for the exact piece I am talking about.

 

Thank you.

 

 

Share this post


Link to post
Share on other sites

There are some drawings you can download from O'Connor. If you can't find them I can send them. In that case PM me with your email. If for some odd reason you can't get your part from O'Connor you could try Transylvania Films, they overhaul a lot of old O'Connor and have parts.

 

Cheers.

Share this post


Link to post
Share on other sites

The rosette is the only part of OConnor fluid heads that get worn off. Not sure about the part number though. You need to contact Oconnor through their site ocon.com or you can check any of your resellers Filmtools/Abel cine etc.

Share this post


Link to post
Share on other sites

They still look good. I have seen worse…no teeth!

 

The part that is worn down on the left is the platform handle spline p/n 1030-129. It is now composed of a plastic material.

 

The part that is worn down on the right (part of the arm) is the handle head p/n 1030-084.

 

Remove the arm and you will need an Allen key to remove 3 screws p/n 04298 holding the platform handle spline. Along with it is a roll pin p/n 00506 which is a little difficult to remove. It’s best to get one – it is very cheap compared to the spline and the handle head.

 

If you ever break the Kipp lever (the little arm that you pull out to tighten the arm down) its p/n 09119 along with a washer and screw, if needed, p/n 04294 and p/n 08434, respectively. I’ve seen them get broken when the tripod/head is placed in a narrow case.

 

These parts should be available from a pro or broadcast camera shop.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  


  • Just Cinema Gear



    Tai Audio



    Media Blackout - Custom Cables and AKS



    Abel Cine



    Gamma Ray Digital Inc



    Serious Gear



    Glidecam



    Rig Wheels Passport



    Paralinx LLC



    FJS International



    Ritter Battery



    New Pro Video - New and Used Equipment



    Broadcast Solutions Inc



    G-Force Grips



    Visual Products



    CineLab



    Wooden Camera



    Metropolis Post


    Cinematography Books and Gear
×
×
  • Create New...