Jump to content

Shooting Log with C300


F Bulgarelli
 Share

Recommended Posts

Hello,

 

I'm getting ready to shoot a corporate with the C300 and was thinking about using Canon Log to give the director more flexibility in post.

I was curious about other people experiences with the C300, specially in regards to exposure using Log and using the WFM and Zebras.

Anything to watch out for.

I ll do a test tomorrow but any advice is appreciate it

Thanks!

FB

Link to comment
Share on other sites

I shot a short film using Log on the C300, it was the first thing I shot with the camera. As it was my first time with the camera it was a bit of a struggle to know what to do for exposure, as there's a lot of information on the web, some of it conflicting.

 

There's a setting to show a non-log view on the viewfinder as you shoot which is helpful. In the end I used a mix of going by eye from the screen, the waveform and a light meter.

 

It's worth getting the manual and reading it very thoroughly, especially the section about how the camera responds at different ISOs, which isn't very intuitive and IIRC differs if you shoot log.

Link to comment
Share on other sites

  • 2 months later...
  • 2 weeks later...

I shoot mostly in C-log with my C300. The WFM is on most of the times and it helps a lot. In a recent feature film, I was shooting for the 2nd unit and I shot in C-log. Post guys were happy that they could grade it well to mix with the files from the Red which was the A camera.

 

For quick turn around projects WDR profile is cool. I guess when one is not sure what the post guys will do, shooting in WDR should be good so that they can't mess up a lot and deviate from what we are happy with as a DoP.

Link to comment
Share on other sites

  • 5 months later...

I've been having an absolute BLAST shooting C-log with my C100! Expose 18% grey at around 32 IRE on your waveform (I push interior shots up to 40 IRE sometimes) and you can just throw a LUT and some sharpening quickly to finish in post or you can get crazy with the nodes and push your image surprisingly far for 8-bit 4:2:0 AVCHD. It really turned the camera up to 11 for me!

I agree that the WideDR is a fantastic profile to maintain the integrity of your image if your not sure the post workflow will be proper. It looks wonderful if your just handing off the files from camera.

Bang for buck, C-log FTW! Just make sure your post workflow is up to it as well!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Forum Sponsors

Film Gears

Serious Gear

Metropolis Post

Abel Cine

Tai Audio

New Pro Video - New and Used Equipment

DMX-iT

Visual Products

Gamma Ray Digital Inc

Broadcast Solutions Inc

FJS International

CineLab

Wooden Camera

Cinematography Books and Gear



×
×
  • Create New...