John Salim Posted August 24, 2017 Share Posted August 24, 2017 Hello All, I wonder if anyone can tell me if it's easy to fix the footage counter on a regular Arri SR-2 magazine. This is the small rotary counter on the take up side ( ...not the feed side / arm roller gauge ). I'm guessing there's a belt between it and the plastic mag-to-camera drive gear. Any advice would be most welcome. Many thanks, John S :( Link to comment Share on other sites More sharing options...
Premium Member Dom Jaeger Posted August 25, 2017 Premium Member Share Posted August 25, 2017 How easy it is to fix depends on what's wrong! Yes a spring belt runs from the drive shaft to the counter worm gear. You can access the area by removing the plate with pressure plate (2 larger screws at top right and bottom left) and the small cover plate under the counter (2 screws). Link to comment Share on other sites More sharing options...
John Salim Posted August 26, 2017 Author Share Posted August 26, 2017 Nice one Diamond Dom ! I discovered the worm was a little sticky so ( very lightly ) touched it with some oil and that freed it up nicely. Thanks very much for your expert advice - it's very much appreciated :rolleyes: Best wishes, John S Link to comment Share on other sites More sharing options...
Premium Member Dom Jaeger Posted August 28, 2017 Premium Member Share Posted August 28, 2017 Good on you John, glad it's fixed! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now