Jump to content

Can I use normal generator to power tungsten light?


Hanifi Juffri
 Share

Recommended Posts

Yes you can use normal generator for tungsten as long as the basic voltage regulation works in the genny so that it does not go excessively over normal.

 

Hmi lights are very picky about voltage variations and they really need an inverter generator to work reliably. You may not be able to even strike one if you are 15v under the rated voltage for example.

 

If you only need small amount of cheap lights then tungsten is fine. If you need hmi type of light for the output I would recommend a 1.2k with small suitcase type inverter generator. Vlock powered led panels are an option as well though they are nowhere near the output of an hmi and you cant get hard really narrow light from them

Edited by aapo lettinen
Link to comment
Share on other sites

Actually with Tungsten it is pretty straight forward on the wattage/amps and since they are dumb lights, no electronic circuitry to add to the mix of figuring out power.

 

 

But people often forget to check out the continuous running specs on generators.

 

Although the Honda 3000 bills itself as a 25amp generator *** that is for only a short time: running less than 30 mins at full amp draw.

In reality it is only a 2800w generator. 23.3 amps of available power.

 

The specs for the Honda 3000is : 120v 3000w max (25amps) and 2800watts continuous use (23.3amps)

 

Anyhoo- yes you can run a 2K Tungsten on a Honda 3000is.

2k tungsten pulls about 16amps.

If you are going to run it out on a long stinger get a 10g extension cord that plugs into the 30amp Twistlock receptacle.



 

 

Link to comment
Share on other sites

Thank you!

Actually with Tungsten it is pretty straight forward on the wattage/amps and since they are dumb lights, no electronic circuitry to add to the mix of figuring out power.

 

 

But people often forget to check out the continuous running specs on generators.

 

Although the Honda 3000 bills itself as a 25amp generator *** that is for only a short time: running less than 30 mins at full amp draw.

In reality it is only a 2800w generator. 23.3 amps of available power.

 

The specs for the Honda 3000is : 120v 3000w max (25amps) and 2800watts continuous use (23.3amps)

 

Anyhoo- yes you can run a 2K Tungsten on a Honda 3000is.

2k tungsten pulls about 16amps.

If you are going to run it out on a long stinger get a 10g extension cord that plugs into the 30amp Twistlock receptacle.



 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Forum Sponsors

Visual Products

VidGear.com - Broadcast Video Warehouse

FJS International

Film Gears

CineLab

Wooden Camera

Gamma Ray Digital Inc

Broadcast Solutions Inc

Serious Gear

Metropolis Post

Abel Cine

Tai Audio

New Pro Video - New and Used Equipment

Cinematography Books and Gear



×
×
  • Create New...