Jump to content

Arri 16SR 11 pin fisher connector remote start


Recommended Posts

Could anyone please tell me how the remote start/stop is handled on the Arri 16SR?

To my understanding, there is the 11 pin fisher socket and according to a diagram I have found, pin 7 would be used for start/stop, 9 for ground and 11 for +12.6V.

Nothing more is mentioned there however. Is ground and +12.6V used to supply the attached etxernal device?

How is starting/stopping achieved? Is pin 7 being pulled high shortly (To what voltage? Connected to pin 11?) to trigger a start and pulled again to stop it? Or is it signalled differently?

Thanks!

Link to comment
Share on other sites

Remote start/stop is activated by connecting pin 7 to the +12V on pin 11. It's been many years so I can't remember if it only needs to be a momentary connection or a constant one.. I think maybe it was constant on SR1s and 2s and momentary on (3 pin RS socket) SR3s..

12V accessories are powered off pin 9 and 11.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

Forum Sponsors

Abel Cine

Tai Audio

New Pro Video - New and Used Equipment

Gamma Ray Digital Inc

Broadcast Solutions Inc

Visual Products

Film Gears

Wooden Camera

Metropolis Post

Glidecam

Serious Gear

VidGear.com - Broadcast Video Warehouse

FJS International

CineLab

Cinematography Books and Gear



×
×
  • Create New...