Jump to content

Montell Taraschewski

Basic Member
  • Posts

    39
  • Joined

  • Last visited

Everything posted by Montell Taraschewski

  1. Hey Dirk. Tried ordering stock directly from Kodak 2 weeks ago and they could only forward me contacts of private customers which had some rolls to sell. From what I’ve been told they expect most stocks from past orders to be shipped within a month. Over the next few weeks the situation is expected to come back to normal. Although 7219 might remain hard to get due to a significantly greater demand.
  2. Had the same problem on my SR2. Only had to swap the normal screws for shorter M4 ones and now my new handles work just fine.
  3. T Havent seen one these before ! Thanks for the heads-up Duncan. Although i must admit im somewhat intimidated by its size. How tall/wide is it compared to a regular Harrison Tent ?
  4. Thanks Omar. Guess I have to clarify I’m only looking for stock on 2” spools and not on daylight loading spools.
  5. Hello everyone! Im currently in the market for 16mm color material. Can be new Kodak Vision 3 or older Vision 2 stock. Also interested in short ends / recans. Preferably located within the EU. Thanks you in advance, Montell
  6. Looking for a used, well maintained Harrison Film Changing Tent. Also open to other manufacturers. Thank you in advance, Montell
  7. Hello everyone, im currently looking for a set of either Optar Illuminas or Optika Elites S16 primes. Mostly looking for wide lenses (6.6, 8, 9.5, 12, 14, 16mm). Could also offer a Zeiss Optex 12-120mm PL zoom for trade (+ extra cash). Also keen on other S16 primes. Looking forward to your offers. Preferably located within the EU. Kind regards, Montell
  8. Hey there, from my experience it’s worth either upgrading to a PL Mount or buying a SR2 with a pre installed PL Mount. In the long run, there are more lenses to choose from as bayonet lenses are getting more and more rare. On the other hand lenses with a bayonet mount might be a bit cheaper and can easily be adapted to pl using the right adapter if necessary.
  9. Hello everyone, looking for a CineMilled Control Panel for my Ronin 2 Controller. https://cinemilled.com/p/ronin-2-control-panel/ Preferably located within the EU. Also looking for other alternatives, if there are any... Thanks in advance and stay healthy, Montell
  10. Hey there Mathew, we achieved a similar effect/look using these special diopters made by vantage in combination with uncoated Zeiss high speeds. https://www.vantagefilm.com/en/tools/vantage-squeeze-diopters Greetings from Germany,Montell
  11. Recommend getting a battery powered litemat, Aladdin Bi-Flex or any other foldable bi-colored light and putting it into a paper chinaball. Don’t forget about putting some sort of diffusion onto the open end of the ball.
  12. Did this some time ago. Highly recommend if on a budget
  13. Hey there Toto, a guy over on the smaller more local german version of eBay is currently selling a few. Maybe worth dropping him a message. https://www.ebay-kleinanzeigen.de/s-anzeige/mattscheibe-fuer-arri-sr-3/1594585604-245-6441?utm_source=telegram&utm_campaign=socialbuttons&utm_medium=social&utm_content=app_ios All the best, Montell
  14. In case anyone ever has a similar problem and searches for an easy fix. Here’s the solution: AJA Region Of Interest SDI Converter https://www.aja.com/products/roi
  15. Hello there Paul, Sorry for my late reply. Been rather busy the past few weeks. Unfortunately due to the whole corona situation and especially how it affects the whole transit of parcel i cant justify the risk of buying outside the EU Nonetheless im still looking for reasonable offers! Thank you all for the interest and help thus far!
  16. Greetings everyone, Hope you’re are all doing well! Im currently looking for an externally mounted device, which would enable us to set a custom anamorphic desquezze as well as a 90 degree image flip. Ideally the device uses either a HD-SDI or HDMI signal and is customizable through a pc connection. I only require it for monitoring. Also It should be reliable enough to allow our drone OP to frame the shots without any signal processing issues nor long delay. Looking forward to your ideas 💡 Thanks in advance and stay healthy! -Montell
  17. Thanks for the heads-up David ! Although for now, id like to focus on owner operated gear.
×
×
  • Create New...