Arri 416 Plus - In LA

Dennis Toeppen · June 15

Camera is in Valencia, CA. Sale includes servicing by AM Camera. DM me if interested.

DP Owned / Never a Rental.

I bought this from a German DP in Dusseldorf in August 2013. I've shot about 10,000 feet with it since purchase. It is in excellent condition. It has been stored in my film vault at 65F/35%RH until it moved to LA 5/5/24.

In an Arri 416, the magazine does more than just hold film. It also contains the pressure plate. The pressure plate is typically part of the camera, and it is critically important in determining image quality and ensuring proper registration without gate weave. The magazines included with this camera are *extremely* low mileage magazines. They were purchased new from Arri in Burbank, CA in 2013. They have been used about twice, - once in 2013 and another time in 2019 -- only when I needed more than my two used mags for a project. Since this camera was never a rental and has extremely low-mileage mags, it is a MUCH better camera than anything else offered for sale these days.

Camera was checked out by Arri in Blauvelt NY on 6/16/23. Ground glass parallax was adjusted and left front squishy button cluster was replaced to resolve intermittent functioning of one button. No other issues were found.

Package Includes:

1 Arri 416 Plus Body K1.66001.0-3032, excellent condition
1 Arri Spherical Viewfinder with regular eyecup, minor rub marks on black paint
1 Antenna for motor radio
1 416 Integrated Video System

1 ea Mini Monitor 3.5T NTSC/PAL K2.47817.0
1 ea Arri Monitor curly cord
1 ea Monitor Support elbow rod thingy

3 ea 416 Shoulder Magazine 120/400 SHM-3, K2.55026.0 Barely used, purchased new from Arri Burbank in 2013

2 ea Arri factory boxes & foam for SHM-3

1 ea LWS-5 light weight support with no rods

1 ea 416 Shoulder Pad (SP-2), K2.55030.0

1 ea 416 Low Mode Support Set (LMS-2) K2.55029.0
1 ea 416 Sled K4.65491.0, 19 mm *
1 ea 416 Accessory Plate K4.65492.0, 19 mm *
1 ea Base Plate K4.54362.0 *
1 ea 416 Steadicam Plate, K2.55035.0 *
0 ea Rods - no rods included

* I think these are correct part numbers, please verify with pictures

1 ea Body Cap for Film Magazine port
1 ea Body Cap for PL lens mount

1 ea K5.66921.0 416 Shutter Tool New
1 ea K5 26267 Aperture cleaner New
1 ea Assorted mag stickers
1 ea S16 Fiber Screen installed in camera
1 ea K2.65118.0 Fiber screen New 1.85 with 1.33 tick marks

1 ea Pelican 1630 (wheeled) to hold built camera. Accommodates long handgrip (not included), two OBB-2, mag on camera, 1 spare mag, dessicant packet. One dessicant pack included.

1 ea Pelican 1560 (wheeled) to hold up to 4 mags, and charger(s) - has crazy-expensive padded inserts.

2 ea 416 On-board Battery Charger K2.66004.0

2 ea Standard US 120v cord for battery charger

Arri manual states that OBB-2 On-Board Battery will power camera through 7 rolls of film or 4 hours on standby.

1 ea 416 On-board Battery (OBB-2) s/n 1777 New 2015, properly maintained, tested 11/30/23 in standby mode with IVS and 3.5" monitor turned on. Endurance was 6 hours 31 minutes before low power warning LED in viewfinder began flashing.

1 ea 416 On-board Battery (OBB-2) s/n 0716 Purchased with camera, re-celled 2013, properly maintained, tested 11/29/23 in standby mode with IVS and 3.5" monitor turned on. Endurance was 6 hours 15 minutes before low power warning LED in viewfinder began flashing.

1 ea 416 On-board Battery (OBB-2) s/n 0105 Purchased with camera, re-celled 2019 by Ritter, properly maintained, tested 12/2/23 in standby mode with IVS and 3.5" monitor turned on. Endurance was 6 hours 22 minutes before low power warning LED in viewfinder began flashing.