PeterJacobsen Posted August 9, 2006 Share Posted August 9, 2006 I would like to create a look similar to the photos below from a Dior ad campaign. I like the way these photos are heavily backlit and soft. Whenever I use a lot of backlight, the light is much too hard even though I'm using softboxes. Obviously I can cut the light down, but then I lose the heavy backlight effect. In essence, I want to soften the backlight but retain its intensity. I would appreciate any suggestions on how to go about achieving this effect. Thanks! Link to comment Share on other sites More sharing options...
Premium Member Adam Frisch FSF Posted August 9, 2006 Premium Member Share Posted August 9, 2006 Hair tends to look frizzy when backlit (hence why virtually all hair commercials are front lit), but if the source is big enough then it can look good. It's a bit like cars - you reflect a big source into your subject, rather than light it directly. These images are also heavily doctored in photoshop - I'm betting the 'blown out' background is more done after the fact than in camera. Get a butterfly and do a wedge-light so it's soft and nice (or just bounce). As you can see in the first photo, the light is actually more a side-light rather than a backlight. The other two images have more of a 3/4 backlight (and as a result, the hair gets frizzier). Link to comment Share on other sites More sharing options...
Olex Kalynychenko Posted August 9, 2006 Share Posted August 9, 2006 I would like to create a look similar to the photos below from a Dior ad campaign. I think, they use super soft lenses, or lenses with soft front filter or lens with rear soft adapter. This can be lens with special optical scheme similar of monocle, single eye-glass. Link to comment Share on other sites More sharing options...
Mario C. Jackson Posted August 9, 2006 Share Posted August 9, 2006 I agree with Adam. All the pictures look they are side lit. They probally used to soft sources on both sides and maybe a bounce in front of her face. But I strongly believe most of that was done in photoshop. A friend of mine did the exact same thing in photoshop. Hope this Helps Mario C. Jackson Link to comment Share on other sites More sharing options...
Ram Shani Posted August 9, 2006 Share Posted August 9, 2006 i use tow cross back for situation like this so i have the back is more rapping like soft light or kinos but you have to be careful not to touch the nose Link to comment Share on other sites More sharing options...
Bob Hayes Posted August 9, 2006 Share Posted August 9, 2006 I?ve gotten into bouncing my back lights. I?ll use a 3?x3? foam core bounce with a medium soft Rosco bounce material on it. Bu arming it out and hitting it with a bight spotty light I get a back light that wraps, is controllable, and is very light weight. Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted August 9, 2006 Premium Member Share Posted August 9, 2006 If you want a bigger, softer, brighter backlight then you just need to make one -- bigger frame of diffusion, bigger light behind it. The trick is getting it behind the talent without seeing the rig. You could, for example, angle a 12'x12' frame on high-rollers behind someone, angled-down at 45 degrees, so that the stands are off-camera on each side of the frame. Then bounce a really bright light into the 12'x12' frame (of whatever, Griflon, UltraBounce, etc.) If the backlight isn't soft enough for you, it's because either your diffusion isn't large enough or it isn't close enough to the subject, and if it isn't bright enough, it's because you aren't using a big enough light. Some people will put a row of white card, bounceboards, etc. along the top of a backwall and then bonce light into those. Or put a row of softlights like 2K Zips in a row to create a bright line of light behind the person's head, above frame. Link to comment Share on other sites More sharing options...
Bob Hayes Posted August 9, 2006 Share Posted August 9, 2006 I?ve gotten into bouncing my back lights. I?ll use a 3?x3? foam core bounce with a medium soft Rosco bounce material on it. Bu arming it out and hitting it with a bight spotty light I get a back light that wraps, is controllable, and is very light weight. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now