Bryan Becker Posted June 6, 2022 Share Posted June 6, 2022 Is there a particular on camera monitor or set up that would allow playback by means of screen recording that I could use on an Arri sr3? If not Any suggestions for an inexpensive HD on board monitor? Link to comment Share on other sites More sharing options...
Premium Member Tyler Purcell Posted June 6, 2022 Premium Member Share Posted June 6, 2022 Is it an HD tap? Link to comment Share on other sites More sharing options...
Bryan Becker Posted June 6, 2022 Author Share Posted June 6, 2022 Right now I have CEI COLOR VIDEO ASSISTANT on the camera with a Analog to SDI converter and Ptap power converter. However I saw that AZ-spectrum makes this HD SDI flickerfree video assist for the SR3, and maybe that would allow me to not need the sdi converter. I just have no idea how much AZ will charge for that item. I’m calling them tomorrow. Link to comment Share on other sites More sharing options...
Bryan Becker Posted June 6, 2022 Author Share Posted June 6, 2022 43 minutes ago, Tyler Purcell said: Is it an HD tap? Right now I have CEI COLOR VIDEO ASSISTANT on the camera with a Analog to SDI converter and Ptap power converter. However I saw that AZ-spectrum makes this HD SDI flickerfree video assist for the SR3, and maybe that would allow me to not need the sdi converter. I just have no idea how much AZ will charge for that item. I’m calling them tomorrow. Link to comment Share on other sites More sharing options...
Premium Member Tyler Purcell Posted June 6, 2022 Premium Member Share Posted June 6, 2022 11 hours ago, Bryan Becker said: Right now I have CEI COLOR VIDEO ASSISTANT on the camera with a Analog to SDI converter and Ptap power converter. However I saw that AZ-spectrum makes this HD SDI flickerfree video assist for the SR3, and maybe that would allow me to not need the sdi converter. I just have no idea how much AZ will charge for that item. I’m calling them tomorrow. Got ya, so yea I'd get the VP tap, it's pretty good. It's also HD vs the stock one which is composite SD. Then ya just use any flavor of monitor that has build in recording and you're good to go. Link to comment Share on other sites More sharing options...
Bryan Becker Posted June 6, 2022 Author Share Posted June 6, 2022 2 minutes ago, Tyler Purcell said: Got ya, so yea I'd get the VP tap, it's pretty good. It's also HD vs the stock one which is composite SD. Then ya just use any flavor of monitor that has build in recording and you're good to go. Amazing, thank you. Would you mind telling me what VP stands for and if the tap I mentioned from AZ-Spectrum is a VP tap or where I could find one? Link to comment Share on other sites More sharing options...
Premium Member Tyler Purcell Posted June 6, 2022 Premium Member Share Posted June 6, 2022 24 minutes ago, Bryan Becker said: Amazing, thank you. Would you mind telling me what VP stands for and if the tap I mentioned from AZ-Spectrum is a VP tap or where I could find one? Oh haha visual products. AZ-Spectrum is another company who makes taps. They're just super backed up. You can probably get a faster turn around with the same quality over at Visual Products, who are in Ohio. Link to comment Share on other sites More sharing options...
Bryan Becker Posted June 6, 2022 Author Share Posted June 6, 2022 Just now, Tyler Purcell said: Oh haha visual products. AZ-Spectrum is another company who makes taps. They're just super backed up. You can probably get a faster turn around with the same quality over at Visual Products, who are in Ohio. Thank you, you’ve been a great help. Link to comment Share on other sites More sharing options...
Felipe Larrondo Posted June 7, 2022 Share Posted June 7, 2022 (edited) Hello Bryan, for recorder monitor i like to work with the Atomos Ninja V with SDI module as an onboard on the camera, and output from there to the teradek or any other monitors you are sending signal to- so they get playback as well. This will work with SD signal converted to HD or with a naitve HD tap. Regarding the HD tap, consider whether or not the upgrade will include manual iris or set iris, integrated menu toggle or joystick toggle cable, internally powered or powered through an external cable. These are the main differences I find. Ideally you can get an HD tap conversion with footage counter but I have not seen that out yet. Edited June 7, 2022 by Felipe Larrondo spelling Link to comment Share on other sites More sharing options...
Bryan Becker Posted June 7, 2022 Author Share Posted June 7, 2022 2 hours ago, Felipe Larrondo said:This will work with SD signal converted to HD or with a naitve HD tap. Great info! Sounds to me like I can just use my existing tap with the blackmagic analog to sdi convertor and save on the Video Tap upgrade. Maybe I can use the money to upgrade to a gold mount adapter. Which I know nothing about. I think it helps power more on board accessories? Link to comment Share on other sites More sharing options...
Boris Kalaidjiev Posted September 15, 2022 Share Posted September 15, 2022 @Bryan Becker I have an Aaton XTR Prod with an SD color video tap. I bought a blackmagic a/d convertor plugged in a Ninja V, Atomos Shogun, Small HD and non of them worked I couldn't get a picture through. But when I use an old analogue mon there are no issues. After a few days of banging my head against the wall and reading through the internet I figured it out. Apparently the BM a/d convertor if it receives an SD signal it will only convert it so SD-SDI and for some reason most modern monitors now dont support SD-SDI which I think really stupid. SO in order for this to work on my cam I would have to have a BM a/d convertor and another BM box to upscale the SD-SDI to HD-SDI hahah Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now