Jump to content

Arri BL-3 with video out (lcd)


Paulo Arellano

Recommended Posts

  • Premium Member

Hi Paolo

 

Can you post an image of the color tap? Because it's on a BL III it might be an old one that only outputs a standard def NTSC/PAL signal.

So either find an on-board camera monitor that has NTSC/PAL input, or use a NTSC/PAL to HDMI converter for the newer monitors or you might 3D print a housing and battery plate to house one of these:

https://www.adafruit.com/category/110

Link to comment
Share on other sites

  • 4 months later...

One cool solution is the Z camera E1, which has a micro 4/3 mount and sensor, get a 4/3 to c mount adaptor, plus an external HDMI monitor. The Z camera can record 4k or 1080p video and has a LDC on the back of the camera, the external monitor can be connected by HDMI cable.Also the z camera can transmit image via Wifi!

post-22197-0-74503800-1520620425_thumb.jpg

post-22197-0-79992100-1520620452_thumb.jpg

post-22197-0-26795400-1520620534_thumb.jpg

Edited by victor huey
Link to comment
Share on other sites

  • 4 weeks later...

It looks very cool. Does it flicker? Did you have to put any additional hardware to make it work aside from the lens adapter? Also, does the image fill the entire screen on monitors or does it have black bars on either sides?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...