Oscar Godfrey Posted August 28, 2006 Share Posted August 28, 2006 Hello, I have been reading about technicolor on wikipedia. It explains that the image is split by a prism onto two pieces of film, the light from one beam goes throught a green filter and the other a red. The two negatives are then dyed appropriately. What i don't understand is where the blues come from. Can anyone explain? Thank you. Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted August 29, 2006 Premium Member Share Posted August 29, 2006 Hello,I have been reading about technicolor on wikipedia. It explains that the image is split by a prism onto two pieces of film, the light from one beam goes throught a green filter and the other a red. The two negatives are then dyed appropriately. What i don't understand is where the blues come from. Can anyone explain? Thank you. The light goes through a beam splitter. One half of the prism is filtered green and the image is recorded onto orthochromatic b&w stock (blue-green sensitive) to record the green record. The other half is filtered magenta (red + blue) and the light hits two pieces of b&w negative bipacked together. The top film is blue-sensitive b&w stock to record the blue record. That blue-sensitive roll is dyed red and has no anti-halation backing so that it acts as a red filter, so the light passes through the blue record, gets filtered red, and hits the panchromatic b&w stock behind it to record the red record. Look at this page for the diagram of the camera: http://www.widescreenmuseum.com/oldcolor/technicolor7.htm And then look at the surrounding pages for the history of Technicolor. Link to comment Share on other sites More sharing options...
Dominic Case Posted August 29, 2006 Share Posted August 29, 2006 This is just one aspect of "Technicolor". In the beginning there was a two-colour additive system, with the single roll of negative consisting of alternate red/orange and cyan images. Then they went to a two-colur subtractive system, also with a single strip of negative. Then the most well-known three colour system was developed. But in addition to the camera systems, the Technicolor imbibition printing process is what made Glorious Technicolor what it was. It used yellow magenta and cyan dyes that were transferred from "matrix" negatives onto print film - having more in common with traditional offset printing on paper than with photography - although for some time there was also a thin black & white image printed into a photographic layer on the print film - almost a cmyk technique, and not unlike the bleach bypass or ACE systems used today. The Technicolor labs of today use none of this technology - but the name lives on. Link to comment Share on other sites More sharing options...
Premium Member John Pytlak RIP Posted August 29, 2006 Premium Member Share Posted August 29, 2006 Marty Hart's "American Widescreen Museum" has a very comprehensive section about Technicolor 3-strip: http://www.widescreenmuseum.com/oldcolor/technicolor1.htm http://www.widescreenmuseum.com/oldcolor/fortune-page01.htm 1934 Fortune Magazine Article http://www.widescreenmuseum.com/oldcolor/ball.htm 1935 Article http://www.widescreenmuseum.com/oldcolor/kalmus.htm 1938 Herbert Kalmus article http://www.widescreenmuseum.com/oldcolor/hoch0.htm 1942 Hoch article Some Technicolor photos and illustrations from American Widescreen Museum: Link to comment Share on other sites More sharing options...
Oscar Godfrey Posted August 29, 2006 Author Share Posted August 29, 2006 I see. Thank you. Link to comment Share on other sites More sharing options...
Premium Member Nathan Milford Posted August 29, 2006 Premium Member Share Posted August 29, 2006 I believe hearing that those prisms were so valuable that they were kept in valuts / safes after each day's shooting... I can't imagine how much light you'd lose with that prism, not to mention slow lenses and stocks. *cringe* Link to comment Share on other sites More sharing options...
Premium Member John Pytlak RIP Posted August 29, 2006 Premium Member Share Posted August 29, 2006 I believe hearing that those prisms were so valuable that they were kept in valuts / safes after each day's shooting... I can't imagine how much light you'd lose with that prism, not to mention slow lenses and stocks. *cringe* My records show films Kodak made for 3-Strip cameras included: 1237 EASTMAN Red Sensitive Negative Film 1938-1950 1238 EASTMAN Green Sensitive Negative Film 1938-1950 1239 EASTMAN Blue Sensitive Negative Film 1938-1950 The "Technicolor Monopack" film was 5267 KODAK KODACHROME Professional Film (1942-1951), which had an exposure index of EI 16 Daylight. Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted August 30, 2006 Premium Member Share Posted August 30, 2006 Around the time that Technicolor created their "faster" version when "Gone with the Wind" went into production, Kodak also came out with Plus-X (80 ASA) and Super-XX (160 ASA). I suspect that this faster b&w technology allowed Technicolor to boost its sensitivity. It seems that the faster Technicolor process released in 1938 was around 10 ASA, double its previous sensitivity of around 5 ASA. By the time 3-strip was obsoleted in 1955, it was probably in the 16 to 20 ASA range, since the first Eastmancolor negative in 1950 was around 16 ASA and was designed to compete with Technicolor. Link to comment Share on other sites More sharing options...
Leo Anthony Vale Posted August 30, 2006 Share Posted August 30, 2006 Around the time that Technicolor created their "faster" version when "Gone with the Wind" went into production, Kodak also came out with Plus-X (80 ASA) and Super-XX (160 ASA). I suspect that this faster b&w technology allowed Technicolor to boost its sensitivity. It seems that the faster Technicolor process released in 1938 was around 10 ASA, double its previous sensitivity of around 5 ASA. By the time 3-strip was obsoleted in 1955, it was probably in the 16 to 20 ASA range, since the first Eastmancolor negative in 1950 was around 16 ASA and was designed to compete with Technicolor. Technicolor replaced the daylight balanced 3-strip with a faster tungsten balanced 3-strip around 1952. It was claimed to double the speed, if I recall correctly. Spottiswoode's 'Film and its Technique', which was published in 1951, as 12 or 16 ASA. All the availiable color systems, including bi-pack, were within a half a stop of each other. So the tungsten 3-strip would have been 25 or 32 ASA. The second eastmancolor negative 5248 was 25T. The last, at least British, 3-strip movie was Sandy MacKendrick's 'The Ladykillers'. Otto Heller,who did 'The Ipcress File', was cinematographer. Link to comment Share on other sites More sharing options...
Matthew Buick Posted September 16, 2006 Share Posted September 16, 2006 Can teh Technicolor look be had with any Super 8 stocks ? Link to comment Share on other sites More sharing options...
Premium Member Chris Keth Posted September 16, 2006 Premium Member Share Posted September 16, 2006 Can teh Technicolor look be had with any Super 8 stocks ? Probably, if you started with a saturated positive stock and did expensive color manipulation to get the colorspace right. Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted September 17, 2006 Premium Member Share Posted September 17, 2006 The closest would be 7285 Ektachrome 100D, but production design, lighting, costume, etc. would be a big factor in achieving a Technicolor look. Link to comment Share on other sites More sharing options...
Matthew Buick Posted September 17, 2006 Share Posted September 17, 2006 Egad, too complicated, I'll start with something simpler, like a cheap Reversal. Link to comment Share on other sites More sharing options...
Premium Member Hal Smith Posted September 17, 2006 Premium Member Share Posted September 17, 2006 Egad, too complicated, I'll start with something simpler, like a cheap Reversal.5285/7285 IS reversal. I just shot a bunch of Ektachrome stills with E100VS at Precious Moments in Carthage, MO. The more colorful shots have a very Technicolor look to them. E100VS is almost identical to 5285/7285 so David's telling you how to get your Technicolor look with a modern, readily available film. Link to comment Share on other sites More sharing options...
Matthew Buick Posted September 17, 2006 Share Posted September 17, 2006 (edited) Oh yeah, where can I find this Reversal ? By the way, I mean 3-strip Technicolor look, just like Singin' in the Rain . Edited September 17, 2006 by Matthew Buick Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted September 17, 2006 Premium Member Share Posted September 17, 2006 I believe Pro8mm repackages this stock in Super-8 -- I'm not sure if Kodak has decided yet whether to release it directly in Super-8 cartridges. Link to comment Share on other sites More sharing options...
David Sweetman Posted September 17, 2006 Share Posted September 17, 2006 http://www.widescreenmuseum.com This site is amazing. I learned more in 1 hour of reading than I ever expect to in my film history class. Link to comment Share on other sites More sharing options...
Matthew Buick Posted September 17, 2006 Share Posted September 17, 2006 I believe Pro8mm repackages this stock in Super-8 -- I'm not sure if Kodak has decided yet whether to release it directly in Super-8 cartridges. It would be good if Kodak would start selling all the stocks that pro8mm do, in super 8 cartridges pro8mm is kinda pricey. P'S I'm bidding on a Canon 814 XL-S, what does everybody think of my choice ? Link to comment Share on other sites More sharing options...
Premium Member David Mullen ASC Posted September 18, 2006 Premium Member Share Posted September 18, 2006 It would be good if Kodak would start selling all the stocks that pro8mm do, in super 8 cartridges pro8mm is kinda pricey. The reason it is pricey and the reason Kodak won't do that are the same: all movie film formats are slit by Kodak from very wide factory rolls, so a single manufacturing run would make so many Super-8 cartridges that they would be outdated before they were all sold from a warehouse and Kodak would end up throwing most or part of it away. So the only thing that makes sense for low-volume stocks is to slit them from existing 35mm or 16mm rolls, as Pro8mm does, so basically you're paying twice for the same stock. However, if sales of E100D would be high enough, Kodak would be tempted to put it out in Super-8. Link to comment Share on other sites More sharing options...
Jaan Shenberger Posted September 18, 2006 Share Posted September 18, 2006 some useful info & insight on recreating a 3-strip technicolor look... http://www.aviatorvfx.com/?cmd=frontendOverview&id=color http://www.aviatorvfx.com/index.php?cmd=fr...ndScreeningRoom http://www.theasc.com/magazine/jan05/aviator/page1.html http://www.theasc.com/magazine/dec02/far/index.html# also, in appears that ed lachman used a similar overexposure technique in "touch" in 1997. i saw "far from heaven" projected and though there were some shots that looked more like 3-strip than others, overall it looked pretty awesome. hope this helps. Link to comment Share on other sites More sharing options...
Premium Member Will Montgomery Posted September 18, 2006 Premium Member Share Posted September 18, 2006 Are there any museums or theatres that actually have a working 3 strip Technicolor machine? It would be fun to see one in operation. Link to comment Share on other sites More sharing options...
Jon Kukla Posted September 18, 2006 Share Posted September 18, 2006 Are there any museums or theatres that actually have a working 3 strip Technicolor machine? It would be fun to see one in operation. It's only a cinematography process - the prints are projected as normal on regular 35mm projectors. The prints themselves use a different color printing technology (dye imbibition lithography) instead of a photochemical dye coupler process, but from a projection booth standpoint, it wouldn't appear any different. In the theater, however, the print will look much more vibrant with greater contrast range. It also is more or less fade-resistant, which makes it very important for archivists. Link to comment Share on other sites More sharing options...
Matthew Buick Posted September 18, 2006 Share Posted September 18, 2006 The reason it is pricey and the reason Kodak won't do that are the same: all movie film formats are slit by Kodak from very wide factory rolls, so a single manufacturing run would make so many Super-8 cartridges that they would be outdated before they were all sold from a warehouse and Kodak would end up throwing most or part of it away. So the only thing that makes sense for low-volume stocks is to slit them from existing 35mm or 16mm rolls, as Pro8mm does, so basically you're paying twice for the same stock. However, if sales of E100D would be high enough, Kodak would be tempted to put it out in Super-8. Egad, oh speaking of egad. http://www.capnwacky.com/eGad/ And yes, I would love to try out a 3 Strip, hear that lovely grinding sound, before the killjoy curator chases you out. Link to comment Share on other sites More sharing options...
Matthew Buick Posted September 20, 2006 Share Posted September 20, 2006 I believe hearing that those prisms were so valuable that they were kept in valuts / safes after each day's shooting... I can't imagine how much light you'd lose with that prism, not to mention slow lenses and stocks. *cringe* After all that Splittin' n Filterin' the film had an equivelent rating of ASA 5. Link to comment Share on other sites More sharing options...
Premium Member Will Montgomery Posted September 21, 2006 Premium Member Share Posted September 21, 2006 It's only a cinematography process - the prints are projected as normal on regular 35mm projectors. The prints themselves use a different color printing technology (dye imbibition lithography) instead of a photochemical dye coupler process, but from a projection booth standpoint, it wouldn't appear any different. In the theater, however, the print will look much more vibrant with greater contrast range. It also is more or less fade-resistant, which makes it very important for archivists. I thought the original projectors had 3 different films that went through a projector as well as the camera. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now