Chris Burke Posted August 14, 2014 Share Posted August 14, 2014 I just purchased a Nizo 561 macro for almost nothing and all is working except the aperture. I put two button cells in. The ƒ stop indicator now works up to ƒ5.6m beyond that it does not move. Is this a typical problem? can it be fixed? would fresh batteries fix it? Link to comment Share on other sites More sharing options...
Anthony Schilling Posted August 17, 2014 Share Posted August 17, 2014 You need to use the Wein air cell px625 batteries for the light meter. If they are running low, the needle won't work at all or only go so far. My Nizo 481 did the same thing the other day (only went to 5.6 with manual control) so i put in 2 fresh air cells and now fully functional. Link to comment Share on other sites More sharing options...
Chris Burke Posted August 19, 2014 Author Share Posted August 19, 2014 I will try that. Do the batteries have to be the Wein brand? Link to comment Share on other sites More sharing options...
Mark Dunn Posted August 19, 2014 Share Posted August 19, 2014 Yes. You can't cut corners on this- you have to use the expensive Wein cells. The voltage must be correct- 1.35V- and stable. Other PX625s are silver oxide and start off at 1.5V which gives an incorrect reading. The Wein cell uses a zinc-air process to replace the mercury which was banned some time ago. There is a voltage-correcting adapter but it is about £30 here and you'd need two. Link to comment Share on other sites More sharing options...
Chris Burke Posted August 19, 2014 Author Share Posted August 19, 2014 Thanks. I will look around for the Wein cells. Link to comment Share on other sites More sharing options...
Jean-Louis Seguin Posted August 19, 2014 Share Posted August 19, 2014 Sounds more like a mechanical obstruction that stops the aperture at f/5.6. If this is the case, replacing the batteries won't solve the problem. Jean-Louis Link to comment Share on other sites More sharing options...
Perry Paolantonio Posted August 20, 2014 Share Posted August 20, 2014 Thanks. I will look around for the Wein cells. I got some of these from Amazon, for my Nizo, last year. I think they were under $10. -perry Link to comment Share on other sites More sharing options...
Anthony Schilling Posted August 20, 2014 Share Posted August 20, 2014 Sounds more like a mechanical obstruction that stops the aperture at f/5.6. If this is the case, replacing the batteries won't solve the problem. Jean-Louis Without proper battery power, even manual controls barely work. Link to comment Share on other sites More sharing options...
Chris Burke Posted August 22, 2014 Author Share Posted August 22, 2014 They arrived today in the post. When I get home, I will let you all know if that fixes the issue, fingers crossed. Otherwise, I will probably send it to Duall Camera for a check up. I got it for nothing, so.... Link to comment Share on other sites More sharing options...
Chris Burke Posted August 23, 2014 Author Share Posted August 23, 2014 The aperture is working. At least I can move it to any f stop. Which I couldn't do before. Any in Boston with a role they want to sell? I would love to shoot one this weekend. Link to comment Share on other sites More sharing options...
Anthony Schilling Posted August 23, 2014 Share Posted August 23, 2014 The aperture is working. At least I can move it to any f stop. Which I couldn't do before. Any in Boston with a role they want to sell? I would love to shoot one this weekend. That's great! You can test the meter without a cartridge out in the daylight and see what kind of readings you get. Sans cart, your camera will meter at 100ASA on daylight settings, or i160ASA on tungsten setting. The filter switch on the Nizo works differently with ASA settings than most other cameras. For example, If you load a cart of 50 daylight, the cart will disable the filter but the ASA rating depends on the filter switch... Daylight setting will read the film as 40 (overexposing 1/3rd) and tungsten setting will read it as 64ASA (under 1/3rd). Basically, make sure the filter switch is always set on the right condition, whether it's automatically disabled or not. 200T will read 160T/100D, with the little extra exposure a good thing.TriX (160T/200D) you will just leave on Tungsten setting since the camera sensor maxes out at 160ASA, 500T will read as 160T or 100D, over by 1&1/3rd stops but then you just set it manually from there. happy shooting! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now