Camelia Celeste Posted September 8, 2016 Share Posted September 8, 2016 Hi everyone, first post here. Glad to be in a forum like this. I have a project due in a few days (Super 8 B&W reversal roll 200T) and my camera (Nikon Super Zoom 8) isn't showing what the automatic exposure is. I'm sure it works, it's just the dial isn't moving in any direction when I check for the exposure (it's stationary between stop 2 and 4). I really need to do this project, but it really is too late to rent a camera tomorrow. What do I do? Can I ballpark the exposure? More or less what would the exposure be (outdoors) from bright light to under the shade of a tree to dusk? Just need at least something to show up. Link to comment Share on other sites More sharing options...
Camelia Celeste Posted September 9, 2016 Author Share Posted September 9, 2016 Nevermind. The camera didn't even develop the cartridge *sigh* waste of money. And now I get a zero in my project. Link to comment Share on other sites More sharing options...
Premium Member Michael Lehnert Posted September 9, 2016 Premium Member Share Posted September 9, 2016 Nevermind. The camera didn't even develop the cartridge *sigh* waste of money. I am not sure what you could mean by this problem description. Have you done some desktop research on the myriad of Super 8 How To websites, YouTube tutorials, and how to do basic light meter reading and adjusting exposure on any camera ever made, be they photo or cine film? Best, /-M Link to comment Share on other sites More sharing options...
Heikki Repo Posted September 9, 2016 Share Posted September 9, 2016 Nevermind. The camera didn't even develop the cartridge *sigh* waste of money. And now I get a zero in my project. Do you mean the camera didn't expose the film, that it was black when you got it back from the lab? Or that the camera didn't move the film and there wasn't the text "exposed" on the end of the film? If you didn't mean any of those, you do know that the film has to be sent to a lab for processing -- you can't just take the film out of the cartridge after exposing it? 1 Link to comment Share on other sites More sharing options...
Premium Member Michael Lehnert Posted September 9, 2016 Premium Member Share Posted September 9, 2016 I can empathise with people to whom things can be difficult to understand at first if one is new to something But I must also say that recently, here in this forum, the line becomes really difficult to draw between assessing whether someone is a troll and out to tie us up, or really a person so substantially uninformed yet equally unwilling to first engage with the most basis concepts and processes ubiquitiously accessible on the Internet and in print libraries with incredibly low barriers of entry, that the questions posed in this forum are actually genuine. Anyway, needed to put this down onto a digital canvas. :huh: Link to comment Share on other sites More sharing options...
JD Hartman Posted September 9, 2016 Share Posted September 9, 2016 Do you mean the camera didn't expose the film, that it was black when you got it back from the lab? Or that the camera didn't move the film and there wasn't the text "exposed" on the end of the film? If you didn't mean any of those, you do know that the film has to be sent to a lab for processing -- you can't just take the film out of the cartridge after exposing it? If the film didn't advance (easy test, put a Sharpie line on the film) and you can hear the motor run, it could be as simple as a broken belt. If you can find an electronics repair (TV, VCR) they might have a belt to fit. Can't borrow a camera from another student? Link to comment Share on other sites More sharing options...
Chris Burke Posted September 9, 2016 Share Posted September 9, 2016 If you can't borrow another camera, PM me. I have several cameras for sale. Very cheap. Link to comment Share on other sites More sharing options...
Camelia Celeste Posted September 9, 2016 Author Share Posted September 9, 2016 Do you mean the camera didn't expose the film, that it was black when you got it back from the lab? Or that the camera didn't move the film and there wasn't the text "exposed" on the end of the film? If you didn't mean any of those, you do know that the film has to be sent to a lab for processing -- you can't just take the film out of the cartridge after exposing it? I have not sent it out to process yet. The film isn't being exposed by the camera. I made a mark on one of the frames and it doesn't move so there's something wrong with the mechanism of the cartridge slot. So I need a good full repair of the camera itself, it seems. Link to comment Share on other sites More sharing options...
JD Hartman Posted September 9, 2016 Share Posted September 9, 2016 Is the motor turning? Can you hear it? With the cartridge removed, can you see the wheel which drives the cartridge turning? As I suggested, could be as simple as a broken belt. Link to comment Share on other sites More sharing options...
Camelia Celeste Posted September 10, 2016 Author Share Posted September 10, 2016 Is the motor turning? Can you hear it? With the cartridge removed, can you see the wheel which drives the cartridge turning? As I suggested, could be as simple as a broken belt. Nope, can't see the wheel. That's probably it... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now