Search the Community
Showing results for tags 'bolex'.
-
I found a super cheap switar lens on eBay. It's a 16mm lens. Below is a link. My question is.... Would this be relatively a "normal" lens for a bolex? I would rather get a ten mm, but don't want to pay 200.00+ for one. http://www.ebay.com/itm/Kern-Paillard-Switar-AR-f1-8-16mm-C-Mount-Camera-Lens-No-Reserve-/371264300473?pt=LH_DefaultDomain_2&hash=item567113a5b9
-
Working Tobin Crystal Sync TXM motor Allows the 16mm filmmaker to shoot crystal sync speeds of 7.5/12/15/24/30/48 Also allows 16mm Bolex filmmaker to shoot with HMI lights. I am throwing in my XLR battery. I can provide a video of the motor running upon request I am open to meeting up locally within NYC. It has served me well! I hope it finds a good 16mm filmmaker. I can email you pictures and video of the motor working, I cannot upload on this site because my file sizes are too big, just msg me. -
Hello, I'm posting this to see if theres anyone looking for or with an intrest in this lens I have a mint condition century 1.9mm fisheye that i would be willing to let go for the right price, This lens is extremely rare
-
I have a filmmaker friend who recently gave me his old Bolex H16 Reflex absolutely free over the holiday season. He has since graduated to a high-end digital setup, but said that the H16 Reflex properly cared for will give many years of service and can deliver great results for low-budget filmmakers. I'm a student, so low-budget pretty accurately describes my operation. However I'd be willing to invest in a lens that would suit my needs. I do stop-motion animation (seeking a BFA in Animation), and would like to use film for my project. The Bolex came with a pistol grip, a supplemental film magazine, cable release and a Vario Switar 18-86mm f. 25 OE lens. I'm wondering: what kind of lenses / accessories would I need to make the H16 Reflex suitable for stop motion animation? The lens I'm currently looking at is a Kern Switar 10mm f 1.6. Apologies for lack of knowledge, as I am an amateur. Thanks!
-
Hi, I've got for sale standard 16mm camera set, including lenses, cables, filters... all fitted in Peli case. Camera is in fully working condition, I have used in only occasionally. The last user, had it got serviced in Bolex, Switzerland (in 2009). Camera is equipped with normal 16mm gate, bolex bayonet mount, in-camera filter holder and TTL exposure meter (till ASA 640) What's in set: Bolex EL 16mm camera mark.II Kern Vario-Switar compact zoom 17-85mm T3,8 Angenieux 15mm f1,3 Bolex bayonet - C-mount adapter (2x) C-mount - Arri Standard adapter gelatine filter holder (4x) battery cable 4pin XLR (2x) Peli case Price is €850 + shipping I'm located in Slovak Republic, and ship to E.U. and U.S.A. Photos: https://www.flickr.com/photos/91204852@N05/sets/72157648786143401/ 16mm footage:
-
Working Tobin Crystal Sync TXM 26 motor Allows the 16mm filmmaker to shoot crystal sync speeds of 7.5/12/15/24/30/48 Also allows 16mm Bolex filmmaker to shoot with HMI lights. I am throwing in my XLR battery. I can provide a video of the motor running upon request
-
Shooting a student project on the Bolex H-16 camera, I understand that 25% of light is lost by going into the viewfinder. That means that on a normal light meter it has to be compensated for right? I will be using 250D stock, would setting the ASA on the light meter to 160 compensate for this? and then could I use the light meter as normal? Also is there any common problems or tips and tricks that might be useful for me to know before the shoot? Thanks Will
-
Shooting a student project on the Bolex H-16 camera, I understand that 25% of light is lost by going into the viewfinder. That means that on a normal light meter it has to be compensated for right? I will be using 250D stock, would setting the ASA on the light meter to 160 compensate for this? and then could I use the light meter as normal? Also is there any common problems or tips and tricks that might be useful for me to know before the shoot? Thanks Will
-
The focus adjustment ring on my bolex h16 reflex camera is stuck. I have tried focusing the ground glass with the lenses removed and the camera pointed at a bright light source. The ring will move a little bit and I can see the ground glass blurring and sharpening, but I do not have full movement of the ring. I tried losening the screw on the focus ring and re-tightening it, and it still will not budge. It feels as if it is catching on something, I can hear a little clicking noise when I try to turn it. I am thinking that I may need to take apart the diopter to find out what is jamming it up internally. I can't figure out how to do this- apart from tightening and loosening the screw on the focus ring. If it is possible, I would like to try to repair this by myself. Any suggestions?
-
Does anyone have any experience with this lens? Either on the bolex or otherwise? I believe it is C-mount, and I was hoping to maybe pick one up to test out on a pocket cam. Just wondering if anyone has any positive or negative experiences adapting it to a M43 mount.
-
I'm having a clearout and so, unfortunately, this has to go. I have used it, it works well, but i have too many things on the go and this just doesnt get the use and love that it really should and i just need to make some room. Its the Bolex Jubilee Super 8 complete in its box, the outer box is a little bit tatty but it has the original sticker on it with the serial number and certificate number so it made sense not to throw it away as it felt like it supports its authenticity. It has the eyecup, the strap, the remote, the certificate (in its original envelope) and even the original purchase receipt from 13/06/1978 although i think the manufacturers warranty may be slightly out of date now, lol. Price....£45? Plus the delivery cost of your choice and i would prefer it to be a "signed for" service so we have insurance and can track it...peace of mind both ways really.
-
Hello everybody. It comes to a time where you sell or die. So I'm selling. All my 16mm Film equipment. I'm listing in here first before going to eBay, as you guys might be interested in something and I can spare some of my time and a but of money that would go to to ePay. All I can guarantee is pristine/excellent. PM me and I can check and send you the best price I can do so I might sell some of it quick and painless. Here we go (separated by groups I intend to sell, not happy to split unless you make an offer I couldn't refuse: 1 Arriflex 16s Body in pristine Condition (being serviced by Les Bosher in UK). 2 Arri 16 S magazines (1x12VMotor and 1X 8V motors) 1 Tobin Rev Motor TXM 23 1 Arriflex 16s Body in pristine Condition (being serviced by Les Bosher in UK). 2 Arri 16 S magazines (2X 8V motors) 1 Tobin Rev Motor TXM 23 1 Bolex EL 16mm (late model, with Original Battery re-celled by Chambless Equipment USA) 2X Bolex Magazines 1 Take-up Motor 1 Kern Vario Switar 10-110 POE 1 Bayo-C Mount Adapter 1 Original (beated) Box. Some filters and other extras (Cables, etc) 1 Bolex Rex 5 ULTRA 16mm (by Bernie o'Doherty) 10, 16, 25 (collimated by Bernie too) & 50mm Lenses (recently acquired), all RX lens in pristine condition, no nasties of any kind, perfect images. Barely seen marks in the barrel in some (these will be the hardest pieces of my selling kit). 1 Original Bolex handle. + small extras, filter, etc. That's it. Let me know if any real takers around, just PM me. I can ship worldwide (from UK). A reminder that I'd make my best for a fair price. just please bear in mind they're all in great shape, even for collectors. And alsoI'm servicing the Arriflex with Les Bosher to be sure they will be sold working and in great shape. Thanks, Flavio
-
Hey, I've got a Bolex EBM 16mm cam in pretty good condition that doesn't seem to run. I've tested it with multiple power sources and the red light turns on but the motor does not run when you press the button. I've tried to find people with Bolex knowledge in the Vancouver area but have had no luck! Any ideas as to what could be the problem? Or any suggestions as to my next course of action? Thanks in advance!
-
Ok, this is my first film shot with motion picture film. I read as much as I could about it a jumped right in. This weekend we filmed a very fun and cheesy, short for a Zombie Film Challenge. I'll be sending the footage to the lab on Tuesday. I had a relatively simple one-location story (my garage) with the lighting you see in the photo. In the back, the large white square on the ceiling to the far right behind the practical is a 250 watt Lowel Pro Light. In front there is a 500 Watt Lowel Omni Light and to the far right a 1000 watt Strand Bambino Fresnel on full. I didn't use my light meter. :( I felt a bit unprepared and rushed. I shot with the 16mm Switar wide open the whole time. I may have shot a few seconds with the Switar preset 10mm but that lens for some reason seems confusing to me even though I've read how to use it. I shot most of the garage scenes on Vison 500T and some on Vision 200T and one on Vision3 200T. My question is do you think I should order 1 - 2 stop Push processing for the garage footage given the film stock used, the lighting conditions and me shooting wide open? Thanks.
-
Hi, my name is Brandon Giesbrecht. I am currently living in St.John’s Newfoundland Canada, I have come across a rare find. My grandmother recently past and left me he camera collection. I have an original near mint metal bolex case with a bolex reflex h-15 model#235541 USA PAT. No. 2811075, Externally It is in perfect condition as my grandmother loved and cherished the camera. till 2013 when her cancer hit bad she was still filming movies and developing herself, the camera since then has been stored properly and no dust or mold has consumed the camera or case. I have many extra’s such as an electronic handle, light finder, and range finder I do believe as well two Kern Paillard lenses for the camera. many other extra’s which can be seen in photos attached (sorry about photo quality taken with iPhone), as I have no passion for film making and though I’d love to keep it as a memory. my grandmother left it to me with other possessions to help me with school though this is the most valued and cherished to her I would like to part with it to someone who will use and love it just as much as she did. If you have any questions at all please don’t hesitate to contact me via email, if you are interested with purchase I will accept pretty much any secure method and am willing to pay some or all of shipping cost depending on destination and cost of shipping. Thank you for your time, Brandon Giesbrecht bran.giesbrecht@gmail.com 161 Pleasant St. St.John’s NL, Canada A1E1M1
-
http://youtu.be/c4IxLmrpktg Ektachrome 100D Super 8 shot on a Bolex Double Super 8 H8 Camera. Cross Processed and Hand Processed. Transferred to Video one frame at a time on a JK Optical Printer.
-
Hi, I'm offering my camera set for sale, it includes: BOLEX EL mk.II normal16 camera body. last user had it sent to Bolex switzerland to complete service. Since then (4 years ago) only about 25 rolls of 100' film have been shot with camera. Camera runs without any problems, and it's really in great shape. Kern Vario-Switar Compact 18-75mm f3.5 zoom bolex bayonet mount. Lens is in mint condition and has great image quality. Angenieux 15mm f1.3 C-mount lens 2x Bolex <> C-mount adapter one genuine Bolex, and one "heavy-duty" from Andrew Alden - Bolex.co.uk Arri Standart <> C-mount adapter 4x behind the lens filters 1x with 85 filter 1x with 85N9 filter 1x with ND6 filter 1x free Power cable to 4pin XLR All fitted in PELI case ----- I'm selling this set, because I've got SR1 ant LTR sets and don't use Bolex any more. I'm located in Slovak Republic, Europe PRICE: € 850 + shipping
-
Hello again. I'd posted some photos of a blimp I bought off of ebay for the Bolex H-16 (http://www.cinematography.com/index.php?showtopic=61757&hl=). It came with a motor but I wasn't sure about the motor's accuracy so I removed it. I also own a Tobin TCS TXM-20Ba Bolex Crystal Sync Motor. I want to use the Tobin motor in the blimp but the motor sticking out of it is just a little bit too tall for the camera to go all the way in place with the motor attached. So I got this bright idea (or not so bright maybe) that I would replace that motor with a shorter motor of equivalent specs/function. These are the specs of the motor currently installed on the Tobin crystal unit: Mabuchi RS-555 VD - 12V - 13500 RPM - High Torque Motor Manufacturer: Mabuchi Model: RS555 VD Operates on 12 VDC nominal No load speed: 13,500 RPM No load current: .75 A 5 pole armature Stall current: 60 A Can be operated in either direction, simply reverse power supply polarity Dimensions (not including shaft): 65mm long x 38mm diameter Shaft dimensions: 3.3mm diameter x 9mm long Weight: .55 LBS Comes with solder eyelets for power connection Here is a slightly shorter motor I recently bought in hopes of swapping the two out. Specification: Product Name: DC Micro Motor Model NO.: 540 Rated Voltage: DC 8-12V Current(no load): 3A Rated Power: 28W Speed(no load): 13500RPM Rated Torque: 1900g.cm Body Size: 36 x 50mm / 1.4" x 2" (D*H) Shaft Dia.: 3mm/ 0.12" Total Length: 75mm / 3" Main Color: Silver Tone Material: Metal, Plastic Weight: 131g Package: 1 x DC Micro Motor Description: Round shape and with 3mm diameter long shaft and 2 pin connectors. My question: Is the new motor a suitable/equivalent replacement for the original motor? I thought it was but I'm just not 100% sure and thought I'd ask anyone who is more savvy with electronics before I go taking the Tobin motor apart. I think the new motor will allow me to use the Tobin unit in the blimp but it would be even better if I could get an even shorter motor. If anyone knows of an even shorter equivalent, please let me know. :)
-
Hello All, Check this out: First instance shooting on the Redlake locam inside. Definitely quite challenging to use. Next time I'll up the light for sure to fix up some of the focus issues. Let me know any other thoughts! Thanks, Luc -
I just got a Bolex H-16 Blimp in the mail today. I bought it on Ebay. The seller really didn't do this thing justice. WOW! I can't wait to test it and see if I can get my Rex5 in there or if I can swap out the motor it came with for the Tobin sync I have. It's roomy in there and everything can be unbolted out if need be. Worse case, I can use it as is with a regular H-16. Anyone familiar with these? It was made by some engineering company called Sonex. These photos make it look small but it's pretty huge... I have to put this on one of my big beast/crane tripods.
-
SUPER 8 STUFF FOR SALE = Bolex 680 + Aspheron Wide Lens £100 Revue TM 8 £75 Bolex Aspheron Wide Lens £30 Sankyo XL-420 £60 Sankyo XL-620 £100 Canon 514XL-S + 43mm C-8 Wide Lens £100 Canon AF514XL-S AUTO FOCUS £100 Canon 67mm C-8 Wide Lens £100 Braun Nizo 6080 Matte Box Cased Kit £300 All prices in GB Pounds. - Everything in excellent cosmetic condition, professionally serviced and fully tested. :) -
Bolex 155 Spare parts and service instructions (PDF 89 pages, 72,6 Mo) : http://dossierpublic.free.fr/Documents/Bolex_155_Spare_parts_and_service_instructions.pdf
-
What it is better to use to lubricate Bolex gears (here a Bolex G16 projector) some of them are made of a material color "Chocolate" which does not appear to be in metal? - Nothing at all? - Oil? - Grease?
-
All film tested and fully functioning with crystal clear lenses: Braun Nizo 6080 Matte Box Cased Kit £250 GB Pounds Bolex 5122 £150 GB Pounds Elmo 1012 S-XL £150 GB Pounds Payment by PayPal plus actual shipping cost will be added (please ask for quote).
-
All film tested and fully functioning with crystal clear lenses: Canon 814 XL-S £150 GB Pounds Eumig Nautica £100 GB Pounds Bolex 680 £100 GB Pounds Canon 514 XL-S £60 GB Pounds Payment by PayPal plus actual shipping cost will be added (please ask for quote).
