Search the Community
Showing results for tags 'arri'.
-
Ok, here's the deal. Consider this a listing for a great Tobin Crystal TXM-22 motor. It comes with a camera, but just think of that as a bonus since the camera may not be worth a whole bunch. I've never shot with it, or with the included mags. I bought it off Craigslist from a DP/Operator on the other side of the country about a year or two ago and one technician who looked at it told me some of the design choices in converting this camera to S16 looked risky and shooting with it may not be worth the risk. I've heard this is one of two or three 16S cameras converted to S16/PL mount by Van Diemen in the UK. It seemed to run fine and the previous owner promised he shot lots of footage on it with no problems so maybe I'm just being paranoid. But! It came with this awesome motor. I actually like it better than the final refinement, the TXM-22A, since the "A" model can't run in reverse. Also included are two of the rare 200' mags for the 16S, although as I mentioned, I never tested them, so this is all "AS IS". There are also two 400' 16S mags. Each mag has it's own torque motor, and I was told by the person I bought these from that they've all been upgraded to be 12V compatible. The camera has been upgraded with a 4-pin Cannon (aka XLR) power connector instead of the old Arri 2-pin "banana plug". It's also been fitted with a 80fps max tachometer (I believe taken from an Arri 2C H.S.) There is no case for the four mags. The camera body case is a bit old looking but still latches closed firmly. The foam is a bit of a mess. No power cables or batteries or lenses are included. Selling for only $800!!! Available to see in West Hollywood through this Saturday. After that, get in touch and I can coordinate a time when you can check it out. For convenience, preference will be given if there is a buyer in the LA area who will pick up in person and pay cash. Pictures! http://www.flickr.com/photos/95212445@N02/sets/72157633331237723/ Please send me a private message if interested. Thanks for looking! Rich
-
HI All. Selling my Arri 16s. Just serviced by Les Bosher in UK. Arri 16s Body + 2 Magazines (1 12v by Tobin and 1 8V) + 1 Tobin TXM22a Motor + Original Arri 8V Motor + Original Matte Box. Kindly accepting offers before going for ePay. Pictures sent on request (attached only one as is allowed 100kb). Thanks, F
-
Excellent Condition. Please contact Rebecca 206.251.9526 ARRI Follow-Focus (see pages 39-41) ARRI FF3 2-SPEED FOLLOW FOCUS FOR 19MM RODS ARRI, RED, PANAVISION 1 - ARRI FF3 Follow Focus 1 - ARRI FF3 Right Focus Knob 1 - ARRI FF3 Right Focus Knob Extension 1 - ARRI FF3 Prime Lens Gear 1 - ARRI FF3 Zoom Lens Gear 2 - ARRI FF3 Marking Disks 2-speed follow focus for video and film cameras. 2-Speed Follow Focus Follow Focus For Video And Film Cameras Efficient Snap-On Mounting Flexible Mounting Options: • Snaps Onto Lightweight Rods • Snap-On Adapter For 19mm Rods • Compatible With FF-4 Accessories
-
Excellent condition Matte Box for sale. Contact Rebecca 206.251.9526 MATTE BOX (see page 43-49) ARRI PRODUCTION MATTE BOX 4 X 4 MB-16 PACKAGE 1 - ARRI MB-16 4 X 4 Matte Box (19mm) 1 - ARRI MB-16 Arm (19mm) 1 - ARRI MB-16 Step Down Bellows 1 - ARRI MB-16 138mm Retaining Ring 1 - ARRI MB-16 80mm Step Down Ring 1 - ARRI MB-16 87mm Step Down Ring 1 - ARRI MB-16 2-Stage Filter Holder 2 - ARRI MB-16 4 X 4 Filter Tray 1 - ARRI MB-16 4 X 4 Eyebrow ARRI MB-16 HARD MATTE SET(5) 12-180MM PACKAGE 1 - ARRI MB-16 Matte 16mm/12mm 1 - ARRI MB-16 Matte 16mm/16-20mm 1 - ARRI MB-16 Matte 16mm/24-28mm 1 - ARRI MB-16 Matte 16mm/32-40mm 1 - ARRI MB-16 Matte 16mm/50-180mm ARRI 19MM SUPPORT PACKAGE 1 - ARRI Sliding Base Plate BP16 (19mm) 1 - ARRI Dove Tail (19mm) 1 - ARRI Support Rod 9.5” (19mm) 1 - ARRI Support Rod 17" (19mm) ARRI ROAD CASE ARRI Accessory Case 22" X 5" X 10" 4 X 4 PRODUCTION MATTE BOX MB-16 The standard equipment of the 4" x 4" production matte box MB-16 includes a 2x filter stage for two rotatable 4" x 4" push-through filters. One of the filter frames is toothed for operation by turning knob or flexible shaft. At the rear of the filter stage there is a receptacle for 4 1/2" filter rings and for an anti-reflection ring. The 2x filter stage can be interchanged against other filter stages. For easy lens changing the matte box swings open 90°.
-
Hey guys, So we're shooting the first ten minutes of our feature film this month and I'm trying to finalize my lens package. We can afford 5 Super Speeds (35, 50, 85, 100, 135) but I don't know how low I can go on 16mm. If it can handle something like an 18 or a 21, or even a 24, I would be very interested. for more information on our movie, check us out at po.st/sowhat -
Hey guys, We are currently selling a Zeiss Distagon S16 super speed lens, MKII, scale in feet & metric, ARRI PL-Mount, 16mm, T1.2. Let me know if you are interested or have any questions.
-
Located in Los Angeles Vintage - 16 MM Arriflex film camera with footage counter Build in West Germany - BL 54085 Hand mount Mounted with Angenieux lens f. 9.5 - 95 mm zoom 1:22 no. 1368423 Built in France. 1 - 400 ft film magazine 1 - follow focus 1 - Matte box 1 - Crystalok Camera speed controller, model CRBL - 5 from Cinema Products, LA Foam fitted Anvil Case 27" by 22" by 10" Camera is used and operational the last time used. Personal camera of Emmy award winning cinematographer, Robert Collins Sold as is and without any expressed warranties. $1500.00 Available for viewing nancybevins@gmail.com Several Photos at Craiglist listing: http://losangeles.craigslist.org/wst/pho/4323599700.html
-
For those of you who've actually used it, is the ARRIFLEX 416 Plus HS louder than the regular speed range 416 models? The former is rated at 29 dB while the latter two are 20 dB. However, unless I'm misinterpreting the specification, I suspect the sound level measurement is referring to operation at the top speed (150 fps vs 75 fps). Or does it actually make more noise at standard frame rates like 24 fps? -
Hey all, One more item I'm looking to part with sadly. If anyone is in the market for this package, or perhaps one of the individual items, let me know and I can arrange a deal. $14,440.00 USD ARRI PRODUCTION MATTE BOX 4 X 4 MB-16 PACKAGE 1 - ARRI MB-16 4 X 4 Matte Box (19mm) 1 - ARRI MB-16 Arm (19mm) 1 - ARRI MB-16 Step Down Bellows 1 - ARRI MB-16 138mm Retaining Ring 1 - ARRI MB-16 80mm Step Down Ring 1 - ARRI MB-16 87mm Step Down Ring 1 - ARRI MB-16 2-Stage Filter Holder 2 - ARRI MB-16 4 X 4 Filter Tray 1 - ARRI MB-16 4 X 4 Eyebrow ARRI MB-16 HARD MATTE SET(5) 12-180MM PACKAGE 1 - ARRI MB-16 Matte 16mm/12mm 1 - ARRI MB-16 Matte 16mm/16-20mm 1 - ARRI MB-16 Matte 16mm/24-28mm 1 - ARRI MB-16 Matte 16mm/32-40mm 1 - ARRI MB-16 Matte 16mm/50-180mm ARRI 19MM SUPPORT PACKAGE 1 - ARRI Sliding Base Plate BP16 (19mm) 1 - ARRI Dove Tail (19mm) 1 - ARRI Support Rod 9.5” (19mm) 1 - ARRI Support Rod 17" (19mm) ARRI ROAD CASE ARRI Accessory Case 22" X 5" X 10" 4 X 4 PRODUCTION MATTE BOX MB-16 The standard equipment of the 4" x 4" production matte box MB-16 includes a 2x filter stage for two rotatable 4" x 4" push-through filters. One of the filter frames is toothed for operation by turning knob or flexible shaft. At the rear of the filter stage there is a receptacle for 4 1/2" filter rings and for an anti-reflection ring. The 2x filter stage can be interchanged against other filter stages. For easy lens changing the matte box swings open 90°.
-
Hello to my fellow cinematography enthusiasts, I have an ARRI Heated Eyecup HE-4 W-Cable for sale - $1,300. ALMOST BRAND NEW (used once) with Cable ARRI Heated Eyecup HE-4 The new and improved Heated Eyecup HE-4 fits on all ARRIFLEX and ARRICAM cameras. Completely redesigned electronics and a new heating element make this a much more robust unit than its predecessor. In addition, the connector housing can now be rotated, which allows the HE-4 to be easily mounted on all cameras in all positions. Popular features of the HE-3 have been kept, though: the HE-4 can be set to 2 power settings (OFF = heating off, HI = constant heating with maximum power, LO = constant heating with reduced power) and it still uses the same Fischer 4 pin connector, so all existing cables can be used. Message if you are interested. We can ship worldwide.
-
Hi, I'm offering my camera set for sale, it includes: BOLEX EL mk.II normal16 camera body. last user had it sent to Bolex switzerland to complete service. Since then (4 years ago) only about 25 rolls of 100' film have been shot with camera. Camera runs without any problems, and it's really in great shape. Kern Vario-Switar Compact 18-75mm f3.5 zoom bolex bayonet mount. Lens is in mint condition and has great image quality. Angenieux 15mm f1.3 C-mount lens 2x Bolex <> C-mount adapter one genuine Bolex, and one "heavy-duty" from Andrew Alden - Bolex.co.uk Arri Standart <> C-mount adapter 4x behind the lens filters 1x with 85 filter 1x with 85N9 filter 1x with ND6 filter 1x free Power cable to 4pin XLR All fitted in PELI case ----- I'm selling this set, because I've got SR1 ant LTR sets and don't use Bolex any more. I'm located in Slovak Republic, Europe PRICE: € 850 + shipping
-
I am in pre-production of a film at the moment that will require an 'aerial work platform' and a lighting rig to imitate moonlight above a wooded area. It's part of an ambitious project and none of the crew members have had any experience with this kind of set-up other than our University, Greenwich, is often a film set (twice a month) and we often see similar set-ups, for a beginner with this kind of project, what would you recommend? Extra info: filming in an area in the UK where no films have ever been made and its a bit of a novelty. Some rough terrain and at least 400ft to the nearest power supply if we get the location we would like. Currently we are looking at a 60ft high platform holding a single 12k Arri HMI Fresnel. Any advice will be hugely appreciated (I understand that I have recently posted in a similar topic however it was 6 years old and I would prefer much more recent experience as advice)
-
£449 ARRIFLEX 16S + 2 MAGAZINES (8V) + ORIGINAL ARRIFLEX MATTEBOX + ORIGINAL 8V MOTOR + ORIGINAL CABLE Fully working. Just serviced by Les Bosher in South Wales. Pristine and clean inside and outside. Original Mattebox is in good condition. Magazines have some signs of use and acrylic pieces (on footage meter) cracked, but does not affect performance. Serial Number: 6587 £499 ARRIFLEX 16S + 2 MAGAZINES (1 12V, 1 8V) + ORIGINAL ARRIFLEX MATTEBOX + TOBIN TCS TM23 + ORIGINAL CABLE Fully working. Just serviced by Les Bosher in South Wales. Pristine and clean inside and outside. Original Mattebox is in very good condition. Magazines have some signs of use and both acrylic piece (on footage meter) cracked, but does not affect performance. Serial Number: 8467 PLEASE CHECK DOCS ATTACHED WITH PICTURES. CAN SHIP WORLDWIDE. WOULD LOVE TO KEEP THEM, BUT NEED THE MONEY.
-
Hey folks, Slightly urgent issue here. I've just loaded an SR3 magazine and when I close the first door the film advance wheel (not sure what it's called) is very hard to wind. The other two I loaded spooled the film out quite easily. Should there be a lot of stick when winding the film out? Cheers for the help.
-
Hey folks, I'm shooting a music video on an SR3 soon with some superspeeds. I had a look through the viewfinder the other day, wide open at t 1.3 and I 'seemed' to be able to pick the focus fairly accurately. I don't want to eyeball the whole shoot however and get back soft rushes. Has anyone judged focus by eye and been ok? Or should I always be measuring? By the way, I'm not going to be shooting the clip at t1.3! Cheers!
-
Hi all. I have an Arri 16mm Set for sale. Beautiful condition: 1 Arri S Body + 2 Magazines (1 8v + 1 12V) + Tobin TXM 23 Motor + Original Arri 8V Motor + Original Matte Box I'm accepting offers before putting on eBay. Let me know how much would you offer. Pictures sent on request. The body has just been serviced by Les Bosher in UK. It's fully working and proper lubbed. Thanks, F
-
Hello everyone, I thought I'd post this here and see if others with more experience could give me their input on this. I've found an Arri 435 ES (4-perf) camera package for sale that I'm extremely interested in purchasing. Film is something I've sorely wanted to learn for years now and I think this could be a great opportunity. The package is going for $6000 and includes the following: 1 Low Bridge 1 8" balance plate rods 6 400' magazines 1 Ground glass 535 AlB 1V square 1 Mask Arri glow 535/435 1V 1 2:35 ground glass 1 2:35 Arri glow mask 1 1:85/1:37 ground glass 1 1:85/1:37 Arri glow mask 1 1:85 1V ground glass 1 1:86 Arri glow ground glass 1 Heated eyecup: 435 2 step 1 Finder support 535/435/16SR-3 1 Operating handgrip 1 Arriglow module: 435 1 Worklight 1 Remote control, Universal: RCU 1 Shoulder set S-4 435 1 Cushion F/435 w/steadicam 1 Follow focus mech only w/right focus knob, right focus knob ext, prime &zoom gears, short ff ext 1 13.5 fiex shaft w/knob 1 38" fiex shaft w/knob 1 Bridgeplate w/15mm rods 1 6.6 MB-14 matte box set 1 CCD optic module 1 lntergrated video module 4 1 24v plug on module 1 65' extension cable for RCU 1 Finder extender 1 Focus crank 1 Mask set, 18-180mm lenses 1 Flex shaft: grad filters 1 Reflex prevention ring for 10mm Zeiss w/158mm diameter 1 138mm filter ring w/rubber sleeve for Angenieux 25-250 HP w/125mm diameter 1 Studio follow focus FF-3 w/15mm bridge plate 35mm format 2 435 power cables 1 Heater eyepiece cable 1 25' RCU-1 cable-spare
-
Hello everyone, I thought I'd post this here and see if others with more experience could give me their input on this. I've found an Arri 435 ES (4-perf) camera package for sale that I'm extremely interested in purchasing. Film is something I've sorely wanted to learn for years now and I think this could be a great opportunity. The package is going for $6000 and includes the following: 1 Low Bridge 1 8" balance plate rods 6 400' magazines 1 Ground glass 535 AlB 1V square 1 Mask Arri glow 535/435 1V 1 2:35 ground glass 1 2:35 Arri glow mask 1 1:85/1:37 ground glass 1 1:85/1:37 Arri glow mask 1 1:85 1V ground glass 1 1:86 Arri glow ground glass 1 Heated eyecup: 435 2 step 1 Finder support 535/435/16SR-3 1 Operating handgrip 1 Arriglow module: 435 1 Worklight 1 Remote control, Universal: RCU 1 Shoulder set S-4 435 1 Cushion F/435 w/steadicam 1 Follow focus mech only w/right focus knob, right focus knob ext, prime &zoom gears, short ff ext 1 13.5 fiex shaft w/knob 1 38" fiex shaft w/knob 1 Bridgeplate w/15mm rods 1 6.6 MB-14 matte box set 1 CCD optic module 1 lntergrated video module 4 1 24v plug on module 1 65' extension cable for RCU 1 Finder extender 1 Focus crank 1 Mask set, 18-180mm lenses 1 Flex shaft: grad filters 1 Reflex prevention ring for 10mm Zeiss w/158mm diameter 1 138mm filter ring w/rubber sleeve for Angenieux 25-250 HP w/125mm diameter 1 Studio follow focus FF-3 w/15mm bridge plate 35mm format 2 435 power cables 1 Heater eyepiece cable 1 25' RCU-1 cable-spare 1 Case-camera 1 case-follow focus 1 case-6.6 MB 3 Case-magazines It comes with everything I would absolutely need minus a lens and some filters. To me it seems like a steal, but I'd like to get 3rd party input. It is worth it going for a 4perf camera? Thanks, Chris
-
Hey all, Question: I noticed when I applied 250 half white Lee diffusion filter on the barn doors of my Arri 1k, that it changed the color of the light even more yellow. Despite the fact that the camera was balanced for tungsten. It was even worse when I doubled up, the diffusion. This effect may or may not have happened when I used a dimmer to lower the light power, it had the same effect. If this is normal, this will make color balancing a nightmare. The lights were not on for that long, say half hour or so. Cheers, Mike
-
Hello everybody, Came here today to ask for advice on building a set of Schneider Primes (arri st or c mount) for use with my black magic pocket camera. I have these both Arri ST mount primes: Schneider-Kreuznach Arriflex-Cinegon 16mm f1.4 Schneider Cinegon 10mm f1.8 So I was thinking on a 25mm and a 50mm to complete the set. Maybe a 75mm or up as well. And I need to know which ones should I get (the names, please) to have a set where they could be interchangeable, meaning I could keep a balance in the quality/looks. So I can chase around to buy them. Thank you all in advance.
-
Hello all -- Posting this on this forum in case anyone is interested. The buy-it-now on ebay is no longer available but I will let this one go for $2799 and end the auction early. It's a real steal at this price and am letting it go for cheap. http://www.ebay.com/itm/ARRIFLEX-Arri-SR3-Advanced-Super-16mm-Film-Camera-PL-Mount-S16-/271279445838?pt=LH_DefaultDomain_0&hash=item3f2983d74e Great camera, but there are a few quirks that are cosmetic don't effect the image quality or ergonomics, but I'd prefer to have a camera in better shape, that is why I'm letting it go. Here is a video of it running recently (9/15/13) : Item is located in NY and will ship domestically. Contact: ekyfilms@gmail.com ---- For Sale Arriflex SR3 Advanced Super 16mm Film Camera All items included with this item are pictured. Besides a few cosmetic wear marks this camera is in working condition. This was recently tested at a camera house (9/15/13) and is fully operational and works as intended and runs smoothly. A video can be sent of the camera running. Included items are: • Arriflex SR3 Advanced S16 film camera body • (2) 400 Foot Arriflex SR2 S16 mags • Arri SR3 Handbook • Light-weight Flightcase • 20/80 Prism For a Videotap (no port cap) Features of this camera include: • 5 to 75 fps • Manually adjustable Shutter angles 180°, 172,8°, 144°, 135°, 90°, 45° • 54 mm stainless steel PL mount • Heated Eye Cup
-
Hey, I´m selling three Arri Ultra 16 Primes, all in excellent condition. http://www.ebay.de/itm/190880216668?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649 Thanks for watching! Best .t -
Arri FF-2 Follow Focus http://toddsines.com/sales/arri-ff-2-follow-focus/ A useful collector's item from ILM For 15mm rods, 100mm spacing Comes with 2 discs, dual hand wheels, whip, crank Paid $2,200, sell for $1,700 Bank transfer / Chase QuickPay / local cash payment preferred; Thanks Todd
-
For sale in NYC: Zeiss T2/50mm Standard Speed MKII PL lens [super 35 / 4K] http://toddsines.com/sales/zeiss50standard/ Optically flawless lens, smooth action, wear on housing but works great. Imperial markings, Arri rear & front lens caps $4,500 Bank transfer / Chase QuickPay / local cash payment preferred; Thanks Todd
-
I have a couple of Arri magazines for sale on eBay. Displacement mags for ARRI 35mm IIC type camera ~ fits most ARRI MOS cameras. They are in excellent working condition ~ never had any problems with jams or scratches. See auction here http://www.ebay.com/itm/231026612284?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649 Have one more to sell when this auction ends.
